Visit us at http://www.carandtruckremotes.com/ Instructional video on how to program a replacement keyless entry remote for most Ford, Lincoln, Mercury vehic…
Ford Mercury Keyless Entry Remote Programming Replacement Keyfob
34
Like
Save
){kind=link}
- Tags:
entry, Ford, keyfob, keyless, Mercury, programming, remote, Replacement
- Categories: Mercury
Comments
Write a comment
You must be logged in to post a comment.
Try rebooting the car by disconnecting the car’s battery for about 15-20 minutes and then try the programming again. Sometimes this will work to help get the car into programming mode. You can also take the remote to a local auto parts store where they can check the signal to see if it is working.
mine remote just stopped working the other day, so i put a new battery in it and it still does not work, so I tried these instructions on my 1998 mercury Ls and still didnt work, nor did it do anything when i turned the key as instructed 8 times did not lock nor unlock after i left on run..
THANK YOU!!! SAVE ME MONEY
The 1997 Grand Marquis requires a different set of instructions. Unfortunately, we do not have a video for that available at this time.
Thanks for the info, but I have a 1997 Mercury Grand Marquis. I just received the key with the remote after buying the car a year ago. I replaced the battery in the FOB and tried these steps but it didn’t work. Am I doing something wrong or is this vehicle to old for a car remote Key FOB?
No, unfortunately those are not compatible.
Can you program a 2010 key/remote to a 2002 mustang??
Yes, this programming procedure should work for the 2002 Focus as well.
Does it also works for 2002 Ford Focus SE? thx
Great, glad to help. Please like our Facebook page.
Perfect instruction. I used a remote from a 2002 Focus on my 2003 Mustang GT. Worked perfect. Thanks.
We have a video that shows how to replace the battery in your remote. Search for: How to Replace Batteries for Car Remotes Keyfobs
If you replace the battery you do not have to reprogram. If it does not work make sure the battery is not upside down. If still not working, the remote may be broken. If you reprogram the remote, be sure to have both there at the same time. Once you hit the lock button on the first remote and the car responds, simply hit lock on the 2nd remote and both will sync.
Yes, these instructions will work for your Taurus.
i recently purchased a used 1999 grand marquis. the keyless entry pad on the driver side door has 2 keys that do not function. the 3/4 and 5/6 buttons do not work. could this be a fuse that needs to be replaced? if i get a replacement keypad will i need a new code to enter my car?
I have a 99 Taurus SHO will the procedure work on my car. Thx
I have two key fobs for a 98 Mercury Mountaineer. The one fob I’ve been using quit working (battery?) and so I’ve been using the 2nd fob only. Is it true that if I replace the battery then the fob has to be reprogrammed? And, if I have to reprogram the first fob (the one with the replaced battery) I have to reprogram the 2nd one as well? Btw, how does one replace the battery on these key fobs anyway because they are sealed? Thanks much in advance.
Try rebooting your car battery by disconnecting it for about 15 mins, then retry the programming from the beginning. This might solve the problem.
Make sure you are ending in the ON position before you push buttons on the remote.
No problem. I am glad we can help with those free remote programming instructions. Please like us on Facebook.
Great! Glad we could help.
We would appreciate it if you would like us on Facebook. Thanks!
It worked THANKS!!!
THIS WAS GREAT, took me 4 times to do it… But it’s very helpful and saved me money…. Thank you! (I have a 2004 Ford Expedition)
Hello there … well i have ford vic 2003 and i tried what you explained but it didn’t work :S
At the 4th turn on/off the doors lock and unlock ,, can you help me with that please ?
How do you program a 98 MERCURY MOUNTIANEER remote i bought a remote that said 98 Ford Explorer they said it will work but i cant get it to go into the program mode and IDEAS out there? HELPPPPPPPPPPPPP
Please contact us at carandtruckremotes or call to discuss
No problem. I am glad we can help with those free remote programming instructions. Please like us on Facebook.
No problem. I am glad we can help with those free remote programming instructions. Please like us on Facebook.
You have to program both remotes during one programming procedure.
No problem. I am glad we can help with those free remote programming instructions. Please like us on Facebook.
It should work as well.
does this work on a 2012 mustang ?
Thanks worked perfectly
1998 lincoln continental and it didn’t work. I tried it a dozen times. I tried eight times. I tried 10 times. I even kept going to see if the car would lock, but nothing
Good morning, I have an 03 Lincoln LS. and I have programmed my Device. The problem I’m dealing with is that I have two devices and when I program one the other gets unprogrammed and stops working. each time i attempt to program the device the other device failes to work
i have a 1998 ford ranger xlt… this worked perfectly first try!! thank you so much!!
Thank you So much for posting this. My 2004 Ford Freestar remotes both died. I replaced the batteries and no luck… Until trying out your solution. You Rock! Thanks again!
hi, i have follwed the steps but after the 8th time leaving it on run my car locks do nothing, they dont lock and unlock.. What am i doing wrong?
i have tried on a mercury mariner 2006 and i having some problems with the remote control.. but the door locks and unlocks when i put key from off to run.. so i going to change the baterry of this control and let u know to add if the mercury mariner 2006 works.