Thanks for watching!
📱 Facebook: https://www.facebook.com/thompsonautotest123/
☕ Buy me a coffee : https://ko-fi.com/thompsonautotest
Mercedes Benz 7G-Tronic Transmission TCM Sensor Failure
28,570
Like
Save
){kind=link}
- Tags:
7GTronic, Benz, failure, Mercedes, Sensor, Transmission
- Categories: Mercedes-Benz
Comments
Comments are disabled for this post.
do you have to program tcu if you just replaced the sensor or you dont need too?
Hi there! Do you know what would cause a delayed upshift? It only occurs when accelerting briskly and then just letting off the gas…rpms suddenly drop and you feel a thump as it engages the next gear up. Somewhere I read that it was an RPM sensor…is that the same thing here?
My 2010 E350 has a 0748 K1 code. took out the valve body cleaned it and flushed system, cleaned the solenoids, tested the K1 blue cap and the rest for clicking sound and 5.6 resistance, all good, put it back and still get the code and Limp mode also. I noticed the 0748 is not included in the codes for the conductor plate errors.
So I bought a used valve body and plate had it programmed and it is back on the road perfect running condition
One of the best and most detailed videos on the subject of this very common problem! Thank you!
Can u use the old range sensor on the new plate cause all the information store on it?
How Much does this time of work costs in the USA?
Thanks to video …
Thank you so much, that info was awesome!
Hi from dubai. Thanks for great information. Can you also guide us how to reprogram the new tcm.
ابو إطار فتاة سعودية ءوطماطك
Thank you for this helpful video, if I replaced this sensors ,do I have to reprogram the gear?
Hello Thomppson,
I have the following error codes on my ML 320cdi 7G GEARBOX: 5399, 7223, 7286,5420. Do you have an idea what is my issue? Sometimes the gerabox not changes the ratio. Or on the high speed I feels it drop the ratio and only the Vandler working. I am waiting for yours response. Thank You: Krisztian
Hey I have a 2006 clk350 and The connector( I’m talking about the connector that’s attached to the conductor plate shaped in a right angle.)broke off the conductor plate circuit board when I was removing it from the transmission. have you or anyone had any experience reattaching/soldering it back on or is there a way to remove the tcu/tcm and place it on a different conductor plate.
Great Video !!!!!!!!!!!!!! Thank You
Ive finally found a video showing someone who knows about Mercedes Transmissions. My son is having an issue with his &g-Tronic Transmission where by when in Drive he cannot nudge the gear lever left and right and use it in manual mode. I know its not specifically related to the speed sensor in your video but can you suggest were we start looking. It comes up with no fault codes when using an ICarSoft DSB2 reader programmed specifically for mercedes. The gearbox is perfect in auto mode its just it has never worked in maniual mode.
Many thank in advance.
Where could i contact you for more information i have a code mor my 06 mercedes benz saying p0730
Where could i get these parts?