Buy Now!
New Brake Pads from 1AAuto.com http://1aau.to/ia/1ABPS02934
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2009-16 Mercedes-Benz E350!
• Check here for more videos on the 2009-16 Mercedes-Benz E350: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_PgQ9y7VUy2_fLEGrbKWT3
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Is that w207?
what might be a good idea if its your first time changing the discs with this design of caliper is to perhaps give a guide to the distance that is acceptable between the new disc and the caliper pad slide pins as they are very very close to the new disc. and it would appear not much play in the hub bearings is allowable without possible contact ??
Great Video. Thanks
Greasing the caliper looks wierd
Great Video! explanation and video quality is amazing. Keep it up! Need to check to see if you guys have a video on generator oil changes, RV's more Mercedes
Great video, what type of torque wrench did you have there? Looked like a great tool? Is it accurate?
Very nice ! Great video!
I didn't see you putting the sensor in it