Mark shows you how to save hundreds of dollars on your Mercedes Benz brake job if you have the time and want to save money. It turns out that the ML350 that …
How to Mercedes Benz Brake Job
13
Like
Save
){kind=link}
- Tags:
Benz, Brake, Mercedes
- Categories: Mercedes-Benz
Comments
Write a comment
You must be logged in to post a comment.
Correction, rotors do not warp! They get high and low spots in the surface. Pulsation in the pedal?!?! Only when abs is active. The steering wheel will shake while braking for a pulsation.
yes it is very similar – the basics are the same
i was just wondering whether this is the same process for a Mercedes ML270?
My bad – I didnt yell at you enough
I was only following the director’s lead
Sorry about the camera work you’re 100% right – One of the few times I’ve had a volunteer/helper holding a camera – Just for the record his name is Eugene and he was the owner of the vehicle – You know the type – wants to look over your shoulder the whole time.
It would have been nice if when you snapped out the pad the camera was on them
even though there is nothing special about this brake system , i just looked to be sure before i started a job
I am a little shocked at the cost of the pads @100.00 per set , that sounds like Toyota dealer prices @80.00 per set , aftermarket should be a lot less , after all there just pads . just a note to anyone reading this, when buying pads at an auto parts store never buy the cheapest , buy one up from bottom
1200$ ? That’s outrageous
I wonder if in Germany(or the rest of europe), MB charges $1700 or 1300 euro for this. Since it is a domestic brand, they don’t use the “super exotic imported” B.S marketing to justify the huge markup.