This is a air intake hose install on a 2000 Mazda Protege ES 1.8L. This is also the same for all years Mazda Protege 99-03 1.6 1.8 and 2.0L. It is a Dorman p…
This is a air intake hose install on a 2000 Mazda Protege ES 1.8L. This is also the same for all years Mazda Protege 99-03 1.6 1.8 and 2.0L. It is a Dorman p…
You must be logged in to post a comment.
){kind=link}
I have a 1998 Mazda protege 1.8 engine. I’m really having a hard time finding an intake hose for it. What is the part number and can I find an intake hose compatible with mine?
como puedo cambiar el bomper trazero de un mazda protege es 1997, gracias
What is the name of the part you take off at 0:35 seconds in the video?
You sir just saved me 200$, thanks alot!!
I’ve owned all Fords, usually Escorts, cheap to fix and decent cars. But, I bought the Protege brand new in 03 and have 103,000 miles on it. So, after thoroughly describing what I’ve done and that hasn’t worked, any ideas from the the author mdavidson2183 or anybody else who owns this car and possibly had similar problems??? Thanks in advance.
So after $471 I didn’t have, had to take a cash advance, I’m still at square one. I had replaced the plugs/wires in Jan 2012, and it doesn’t knock a little bit under power, especially going up hills. Those plugs and wires are a royal pain to replace on the 2.0 DOHC engine, with the coil packs right on top, but just can’t imagine it would be the plugs/wires or coil packs. I bought quality plugs/wires, and even they weren’t cheap. I love the car, but almost wish I had stayed with Fords…more…
So I wrapped the hose completely again, didn’t want to take the original tape off for fear obliterating the hose. Still no good…so I took the car to a shop I trust, they put it on the computer and it came up with 2 codess, lean fuel mixture and unknown idle/stalling issue. Recommendation, obviously replacing the intake hose and replacing the EGR valve. Not cheap, the EGR valve was insane expensive, much like all the parts I’ve replaced on this car. Still not running right. More…sorry
I had the same problem a couple months ago on my 2003 Protege LX with 2.0 DOHC. I started have issues with stalling/rough idle at slow speeds and stops, wrappped he bellows that I found cracks w/ duct tape. Worked great for 2 months, immediately no idle/stall issues and the check engine light went off after a few cycles of running. Then a few days ago the problem resurfaced, so I looked at the intake again, some of the duct tape had appeared to come loose at some points. More…
yes it should be the same
Hi there! Thank you for the video. I have a 98. Do you think the process is the same?
Thanks for listing the part #.
Great video! Exactly what I needed. Keep up the good work.
Likes to put his nuts back on.lol
Very helpful, keep up the good work! One question tho—is your camera attached to your head? LOL
какря баря чето там чешет
yep should be the same process…glad this video helped you! check out my other protege videos!
mine cracked too causing it to idle rough and stall! which has led me here after a 60 buck engine scan to tell me what I already knew. doh! I have an 2002 Protege 5 2.0 automatic, would this be the same or similar configuration for replacement?
could you plz make a mazda protoge spark plug change video? thanks
I just got a 1999 mazda 626 and there is this little spout under the dam intake box and it looks like a hose clamp is holding a hose that got ripped off and its making the underpart of the intake box very dirty with oild and dirt. I dont even know what to call this part it looks like a breather for the tranny but i have no idea does anyone know what to do
Thanks for the video! Just replaced my air intake hose and saved a ton of money!
glad it helped!
I just wanted to chime in and say that I was able to fix my hose myself after watching this video. Saved $90+. Thank you!
I replaced mine with a k&n typhoon system.They give you very good instructions and all the hardware and brackets are included.
@EddyRuxpin, totally! Too bad we had to shell out 100 on the dealership diagnostic to locate the problem.
Thanks for this how-to! I did this and the #2 Engine Coil on my wife’s protege. No more sputter or check engine light. We did a victory lap around the neighborhood after 🙂 Cheers!
Dude what’s that first sensor you took off the intake I was installing a cold air intake on my protege and I broke a hose off it I have no clue what it is so I don’t know what to look for to replace it
Awesome video! I was able to confidently replace my intake hose because of you!