hey I have the mazda 626 I’m not sure of the year either a 96 or 98 but I player have the default radio with cassette player I am finally trying to remove to install another, I’ve managed to get out the radio but how do I remove the rear wires to install another one?
Reset the CD player by disconnecing one of the battery terminals, or remove and disconnect the stereo for a couple of minutes. Then reconnect. This may reset the CD and eject. Otherwise, this is a repair issue.
I don’t know if you’ve already answered this; but I have a 2001 626 and have a CD that will not eject from the radio. The CD won’t play and every time I turn the car on “OUT” flashes on the screen as if it wants to eject the CD but nothing happens. Also the radio plays any station just fine but if I push the “CD Player” button nothing happens and if I push the eject button it just seems to pause the radio each time I press the button.
Don’t have an answer for you on this one without seeing it. However, many Mazda’s have the Bose system. You can not mix a Bose stereo into a non-Bose system and vise versa.
There are kits and wire harnesses available for installation of aftermarket car radios. Aftermarket car radio installation depends on the level of expertise you have. Some instances kits are not needed. Mazda can be tricky.
So… I have a mazda protege 98 and the stereo went. Im wondering because its an old model do i have to have a mounting kit installed.. Ive been getting mixed messages about it…HELP
thank god u saved my life my 96 mazda protege lx has same romoval method as this one i was almost about to take my whole dash console everything out just to get to the damn stereo lol u saved me much time
in my 2001 madza 626 there are 5 holes on the sides. i have put din keys in each of these keys and there are no clicks. do you know how to take that stereo out?
thanks for posting this video!!! i have this exact model and i’m installing a new stereo in mine today, because the cd player is very moody… and this exactly what i needed!!
Man i tried to take my whole dash off to get radio out I kept pullin but it wouldnt come out Luckly i stopped tryin an looked this up otherwise i would have F****d my dash up
That was very helpful….however, if I were to install a different radio (which is what I want to do), would it snap into place like that so easily? Wow, it looked so easy when you did it…it almost seemed like you were putting legos together.
Dumb question: is an aftermarket stereo held in place as the stock Mazda radio? I’ve got an older Alpine radio I want to install and I do not recall if it required mounting to a special bracket or anything…
All the connectors have a small trigger on them. Squeeze the trigger into the connector and it should release.
hey I have the mazda 626 I’m not sure of the year either a 96 or 98 but I player have the default radio with cassette player I am finally trying to remove to install another, I’ve managed to get out the radio but how do I remove the rear wires to install another one?
If want to install a aftermarket radio. Do need to buy any special mounts or will a single din radio just fit in?
I have a 99 626 and I can’t find my radio ground wire
Reset the CD player by disconnecing one of the battery terminals, or remove and disconnect the stereo for a couple of minutes. Then reconnect. This may reset the CD and eject. Otherwise, this is a repair issue.
I don’t know if you’ve already answered this; but I have a 2001 626 and have a CD that will not eject from the radio. The CD won’t play and every time I turn the car on “OUT” flashes on the screen as if it wants to eject the CD but nothing happens. Also the radio plays any station just fine but if I push the “CD Player” button nothing happens and if I push the eject button it just seems to pause the radio each time I press the button.
How about installing a amp and sub to the 02 mazda 626?
I have been looking for this for a week now. Thanks alot man. This also used for mazda 323 astina car stereo
You sure make it look easy! Thanks for the video!
Is there any radio that has the two connecters?
Don’t have an answer for you on this one without seeing it. However, many Mazda’s have the Bose system. You can not mix a Bose stereo into a non-Bose system and vise versa.
my new radio doesnt have two connecters?
There are kits and wire harnesses available for installation of aftermarket car radios. Aftermarket car radio installation depends on the level of expertise you have. Some instances kits are not needed. Mazda can be tricky.
So… I have a mazda protege 98 and the stereo went. Im wondering because its an old model do i have to have a mounting kit installed.. Ive been getting mixed messages about it…HELP
Aftermarket car stereo mounts similar but different…
What if your car never had a raido how can I put one in can you make a vid for that or am I dumb
thank god u saved my life my 96 mazda protege lx has same romoval method as this one i was almost about to take my whole dash console everything out just to get to the damn stereo lol u saved me much time
I heard the face of these plugin/come off. How do I remove the face?
Dealer$hip or locate one in a salvage yard…
in my 2001 madza 626 there are 5 holes on the sides. i have put din keys in each of these keys and there are no clicks. do you know how to take that stereo out?
thanks for posting this video!!! i have this exact model and i’m installing a new stereo in mine today, because the cd player is very moody… and this exactly what i needed!!
whats the ground piece for? do we need it?
Man i tried to take my whole dash off to get radio out I kept pullin but it wouldnt come out Luckly i stopped tryin an looked this up otherwise i would have F****d my dash up
how do you remove the din pocket underneath?
Tools can be purchased on line and at most auto part stores.
where can i buy those tools for removal , or how can i replace them with something that does the same job , and i might have it ? thx
That was very helpful….however, if I were to install a different radio (which is what I want to do), would it snap into place like that so easily? Wow, it looked so easy when you did it…it almost seemed like you were putting legos together.
Dumb question: is an aftermarket stereo held in place as the stock Mazda radio? I’ve got an older Alpine radio I want to install and I do not recall if it required mounting to a special bracket or anything…
Purchase the aftermarket wire harness and kit if needed. This will save time and a headache.
can you help me install i head unit in a 87 mustang….im so lost
how do i get to the stereo to remove it from my 90model mazda 929???need help…going crazy…
A thick wired coat hanger cut to shape, sometimes four long thin nails can work too
Do i really need those ford removing tool to get the stereo out? Is there any other way to get it out? please help