Episode 2.2 Trash to Treasure 2006 Mazda 3 Left Side engine mount. How to inspect, diagnose, and replace left side / driver’s side engine / transmission mount. Most difficult mount to see! Broken mount causes vibrations, shaking, hesitation, and noises! Whitney Automotive Presents Ray’s Driveway
){kind=link}
Came here to follow your instructions in so far as I needed to replace the coolant outlet diverter, thank you it was very helpful. Funny thing though, once I broke everything down i saw that the tranny mount was destroyed! Like completely in pieces, so I followed the rest of your video and replaced the mount. This tutorial, was, as we say in the metro-west section of Boston…Wicked Pissah!
Thank you so much. Thinking of replacing the mount myself. Does it have to be torqued? I dont have a torque wrench
I need to replace my mounts. my right side one broke and I had my mechanic replace it but he's kind of an ass. Literally two weeks later, vibrations and noises again, so I suspect either this one or the other one broke (I have a 2010 Mazda3). I am just curious, do you need to jack the car up and have it on jackstands like you do? Or as long as the Jack can fit under and support the engine it should be okay? Secondly, is there a way to remove the bottom cover (I watched your video) without having to raise the car up on a fancy car lift? I obviously don't own one. Thanks for these videos!
Thank you so so much. You made an awesome video on changing this mount. I felt confident in doing it myself. I appreciate what you do.
how did you know that it was the transmission mount which went bad ?
Does the air box for sure have to come out?
Can I skip that step?
Explained so well with perfect detail. I appreciated no music, socket size, torque..etc and so I did it with no problem! Thank u!
This is a pretty good video. I was going to do this, and it would have been helpful as it hits all the points, but today the mount let go completely and took the transmission mount bracket out as well about 100 miles from home when I was on my lunch break. Sometimes you gotta pay a pro, because it's cheaper than the tow…
Is it a different process for a manual transmission
Great video series on the Mazda 3 super helpful to save money by doing it yourself after following these videos.
Great video, excellent explanations, and guidance. Thanks
Thanks man I was a bit scared changing the engine mounts since I didny know where they were now I feel like I can do it
Will this fix the clicking sound i have when i change gears?
Ernest Goes to Camp reference, nice! Thanks for the help!
Great video thank you.
Picking up a mazda 3 tomorrow with 99k miles that is given to my wife but has a vibration when it gets to 60-70 mph. I hope this solves the issue.
Thank you for your video, it gave me confidence to do the same. Ordered the parts and waiting.
I think I used your other video to replace the right engine mount as well, it went smooth.
I beleived u should have torqued the Mount bolt with the trans jacked
how to check if the mount is bad before removing everyting and ordering parts ? hear some nose starting the car uphill and it vibrate when you put it on drive or reverse
Does this apply to a 2011 mazda 3?
DO NOT MOVE THE THROTTLE PLATE WITH YOUR FINGER
very helpful, thank you
thank for shared
is it good genuine or aftermarket for 2012 model car?
I hope reply soon
hi, what about OEM and ofermarket engine mount ?
thanks for the video it was really helpful
i did this to my mazda 3 in like 30min but then when everything was don't i connected my battery backwards and created a whole new problem lol
Great videos thank from Australia , fixing up sons recently purchase 2007 Mazda 3 these videos are a great assistance .