Simple step by step guide on how to install a dash cam wired to your fuse box. The camera will go on and off with your ignition and save using your cigarette lighter socket.
Part numbers included in the video for extra bits needed.
I am not liable for any injury or damage sustained from the info in this guide. If your worried seek pro advice!
I thought about using the same point in my Mazda 3 for the ground cable but thought it had to touch unpainted metal? Did you test to see if there was any resistance when you fitted?
Thanks, this was a very useful video, well done, my dash cam is now installed in my Mazda 3!
When you put the cable around the top of the A Pillar will this obstruct the curtain airbags
Great video! I am having trouble finding a microblade piggy back adapter. The microblade I have doesn't sit very comfortably in the fuse slot.
Do you have a link to the microblade adapter you used?
Is this the exact same way for North American US 2018 mazda3?
good video; followed for my 2018 mazda 3 gs & thinkware f800. only thing is that i tucked my wire underneath the A pillar airbags instead of over it so that when the airbag does go of the wire wont slap my face.
Very informative video. I have a 2016 mazda 3 and I want to add a 12 volt socket and usb port using your method, are you able to use one of the already empty slots in the fuse box or would you recommend using an already existing circuit?
Thanks for posting such a great guide! Worked perfectly with my 2014 North American Mazda 3. Installed the Pruveeo F5 camera.
Did you have any issues using the mini sized fuse spur in the slot for the micro fuse?
It seems smarter to wire this in since the fuse box is in the footwell rather than running the cable to the center console cigarette lighter.