Shop for New Auto Parts at 1AAuto.com https://trq.video/c-16-ey
This video shows you how to install a window regulator on your 2007-2015 Mazda CX-9. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This repair was done on a 2007 Mazda CX-9 Sport 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Mazda CX-9
2008 Mazda CX-9
2009 Mazda CX-9
2010 Mazda CX-9
2011 Mazda CX-9
2012 Mazda CX-9
2013 Mazda CX-9
2014 Mazda CX-9
2015 Mazda CX-9
Tools you will need:
• Phillips Head Screwdriver https://trq.video/obas-1AXAA00013
• 10mm Socket https://trq.video/oaVM-1AXAA00017
• Trim Tool Set https://trq.video/o3g-1AXXX00006
• Socket Extensions https://trq.video/obek-1AXAA00015
• Gloves https://trq.video/oKi-1AXSS00048
• Painter’s Tape
• Safety Glasses
• Pick https://trq.video/oIE-1AXAA00037
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Mazda CX-9 1st Generation 2007-2015: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_QWY206O5CcO5LjSB6IjN4
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video. Excellent commentary and detail.
Perfect… Step by Step !!
Great Video.
Great video – one school of hard knocks is to reinstall the 10 mm window bolts by hand – slowly. They are easy to cross thread. Gaul the thread or snap the plastic connector and you will buying a new window. Trust me I know.
I have a question, is it the same gear for 4 doors.i appreciate your reply.thanks
1:16 Great video, saved me time and money. However, I didn't remove the harness, and the speaker, I just flipped the interior panel, everything else I followed the video…Thank you
You forgot to say what to do when it GRINDS
I just finished replacing the window regulator and motor in my 2014 CX-9. I couldn’t have done it without your detailed instructions. Thank you!
Great video! How do you know if its your power window motor or regulator?
When replacing broken windows, make SURE you vacuum out the glass bits at the inside door bottom. Or the glass bits will clog up the drain holes and bottom of doors will rust much quicker.
Great video! Just finished replacing my regulator and motor that had stripped plastic gears not allowing the window to go up without help and a lot of grinding noise! Had a couple snags with the first regulator to fitting properly and some of the door panel clips breaking when removing the panel. I found clips at AutoZone for a Bmw # 469270 work perfectly!
This is an amazing instructional video. I need to do this in my CX-9 and already got the part. Just need the time. I appreciate you taking the time to help us!
Thank you so much for taking the time to make this video! Because you were so thorough in showing the steps to do this, I was able to do a repair that would have cost me hundreds of dollars. All four windows needed new motors and regulators. Two windows done, and two more to go. Thank you so much! Excellent video!! Dee
How to fix when the window seems to drop off from the guides when window goes all the way down
Is this a fix for a window that is clunking while going up and down? And sometimes getting stuck down
now show us how to do this with a non working regulator; in my case window wouldn't go up all the way and I managed to have the glass slip off.
Thanks a million! I was able to do this in my driveway and save hundreds! You guys are awesome!
Sept. 9, 2023.
Thanks for the video. It took me a little longer than the video but I would have never attempted it without it. Couple of things I ran into that slowed me down. You make taking the electrical connectors very easy. I had some issues there. It took me some time to get the lock cable and door handle cable back. But that was my fault, I went back and watched how you put them back and I was good. I did break a couple snaps taking the door panel off. But I got everything back in place and everything is working fine. There is a way to reset the automatic up and down feature too. Thanks again for the video.
Very informative…my CX-9 window goes part way up then makes a clicking sound like a stripped gear. Would this be regulator or motor slipping?