How to Replace Mazda 3 Wiper Blades in Under 2 Minutes on a 2012 Mazda 3 2.0L sedan. This applies to most Mazda 3’s. When I first did this job a few years ago it was frustrating, but once followed the sequence below, it became quick and easy
1. Remove old blades by rotating blade until it clicks off
2. Remove old adapter from ‘hook’ end of wiper arm (optional)
3. Remove new wiper adapter from wiper (optional if replacing adapters)
4. Install new adapter into hook
5. Push end of hook into corresponding end of wiper until you hear a click…if properly aligned very little force is necessary, and you can confirm alignment by seeing that the small hole and boss-holes are respectively aligned.
Amazon Affiliate Links:
Parts:
Driver’s Side 24mm Blade: https://amzn.to/2B2cMIf
Passenger’s Side 19mm Blade: https://amzn.to/2B1hKVm
Camera: Nikon D7000 https://amzn.to/2rgKRPw
Lens: Tokina 11-16mm f/2.8 AT-X https://amzn.to/2T5GeDR
Disclaimer:
Due to factors beyond the control of Oliver Porter, I cannot guarantee against improper use or unauthorized modifications of this information. Oliver Porter assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Oliver Porter, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Oliver Porter.
Blde length is in INCHES NOT MM DUUUUUHHHH!!!!!!!!!
24mm is a really short wiper blade!!!
Clear as mud
He meant inches not millimeter lol
Don't bother..this is too fast
No one ever show the angle needed to see what they are doing at the most important step.
This is a terrible camera angle and he didn’t explain it well enough wtf
Yeah but how the heck do you replace just the rubber blade cartridge as opposed to the whole blade unit? Driving me nuts.
Don’t do it this way unless you want to bend your wiper arm or break something.
https://youtu.be/shiQl90MgNA
Worthless video. Stock blades have S hook mechanism.
Why bother making video??? You can’t really see what or how your doing it. You need an assistant to record you!!!!!
Never saw what you did.
Wish he’d take a little time to show what he’s doing
This is not how you do it
24 inches my dude… 475 mm.
Wish I’d seen this an hour ago LOL
He broke the blade off.. smh
You can actually take the whole wiper attachment off at once… It's on a hook so you just have to move it in the right direction
That clip ain’t coming out so easy na
Inches not millimeters.
Most useless video I’ve ever watched
Yeah so I def just broke my windshield wipers