please like this video 🙂 Facebook: http://www.facebook.com/Ghostlyrich Twiiter: https://twitter.com/ghostlyrich had people asking this question for a while …
please like this video 🙂 Facebook: http://www.facebook.com/Ghostlyrich Twiiter: https://twitter.com/ghostlyrich had people asking this question for a while …
You must be logged in to post a comment.
Thanks for the quick reply ill try that out now
down makes it easier. also allows you to see if the magnet will rub the window if your installing speakers
Dumb question window rolled down it up? Before I attempt lol
hmmm if you pull out the top screw on the handle cup you will have access to the cable to open the door. if you cant open the door from there i would see a dealer or mechanic
Hi, Rich, how can I open the locked door (driver side, front) when the lock actuator (selenoid) is bad?? I can not remove the skin panel because the door does not open, even with remote or with key. So, to get to the actuator I need to open the door to be able to remove the skin. How can I open the locked door, if the door is locked? All other doors are opening OK with the remote. Trouble is only the driver side, front door. thanks if you can answer this!!
i have not worked on a 2010 yet. sorry mate
How much different is it for a 2010
you would need to wire them to the door pins in the vehicle. woukd need to test them and wire them to that so they only turn on when door is open
hi again bro haha, i dont know if you hear about courtesy light with the brand, i wan to install it in the bottom of the door panel, but dou you know witch cables are the ones when you open the door the lights turn on?… the point is when you open the door the lamp turn on and reflect the emblem on the floor, and then you close the door and the lamp turn off.. i think you know about that courtesy im talking, i really apreciate if you can tell me witch cables are the right ones.. thnks again 🙂
kicker ks 6×8
What size and brand of those speakers
if i were you buy uour self a long stick zapstrap and work that through the gromet. if you need to lube it with hand.soap
cheers for the vids. Did you end up running any separate wiring for the speakers from the amp? I’m having trouble running the wiring through to the doors
Thanks for the pointers, every little bit of information always help.
usually the doors insides metal bracing is all welded together. i dont think you can simply have just the outside door skin. could always pop the skin off the back doo r and see the backdoors are usually easier to take apart just be carefull when hitting the dent out the main may crack when you reform it. also use a rubber mallet haha anywways hope that helps a little
Nice Vid, I have a large dent on my rear driver side door. I’m guessing the rear and front doors are pretty much the same. Would it be possible to just remove the outer aluminum skin so I can hammer the dent out? Just wanted to see if I can avoid getting to that panel from the interior out. Thanks.
sorry my notifications have been acting up some locks need to be programmed to the key for door locks you should purchase one from a dealeer and ask if it needs to be programmed to the key id
even if it was working fine there are sometimes a metal mechanical arm that works with the motor that can jam up so when you have the door skin off just take a look for and thing fishy
make sure the window lock key isnt pressed. try pulling the window down a little with you jand to make sure its not stuck in the seal the yes next part is checking with a meter and pulling pannel off looking to see whats jamming it up
Well, just few days ago, it was working perfectly.
It just stopped working?
Motor Jammed?
hmm could be it has a actuater arm that moves with the window. If i were you wi would pull the skin off and maybe add some washers to the screws and see if the scrapping disapeers
my front passenger window is spoilt! i can hear the clicking when I try to roll down the window from the driver side but the glass itself does not move.
What could be the problem?
For hiding cross overs look at my new tweeter video and it will give you mor info on cross overs. Let me know if you have anu questions
Tell me more about the crossover.
Back lock yea… should take it to the dealer i only say that so they can match the cylinder lock to the key
My back door lock is broke
What lock ?
How do I fix the lock
Yea man i highly suggest doing components in the door so you have some tweeters up top makes for better sound because the speackers mount so low also means you can crank it less when driving with the windows down
Nice tutorial. Pretty similar to my RX8. Now I can replace my speakers in my 3.