In this video, I show you how to install prosport evo gauges on a mazda rx8.
Links for all that was used:
Lotek Pod:
http://www.gaugepods.com/mazda.html
Water temp adapter:
https://www.amazon.com/Dewhel-Aluminum-Temperature-Radiator-Adaptor/dp/B01I5D0KIA/ref=sr_1_14?ie=UTF8&qid=1491145323&sr=8-14&keywords=water+temp+sensor+adapter+36mm
Sandwich plate adapter:
https://www.amazon.com/Filter-Adapter-Subaru-M20xP1-5-sandwich/dp/B00CS4OQCE/ref=sr_1_1?ie=UTF8&qid=1491134190&sr=8-1&keywords=prosport+sandwich+plate
Oil Temp gauge:
https://www.amazon.com/Temperature-Gauge-Electrical-blue-52mm/dp/B0085XUAAE/ref=sr_1_12?ie=UTF8&qid=1491134150&sr=8-12&keywords=prosport+evo+gauges
Oil Pressure gauge:
https://www.amazon.com/Pressure-Gauge-Blue-Digital-52mm/dp/B007PQFLFQ/ref=sr_1_3?ie=UTF8&qid=1491134150&sr=8-3&keywords=prosport+evo+gauges
Water temp gauge:
https://www.amazon.com/Water-Temperature-Gauge-Electrical-blue/dp/B0085XQ0UI/ref=sr_1_4?ie=UTF8&qid=1491134150&sr=8-4&keywords=prosport+evo+gauges
Instructions for wiring:
http://prosportgauges.com/instructions/evorb/LCDBR-OP-OT-WT-revised2.pdf
Also needed is 3 add-a-fuse things at any auto store
PICK UP A VINYL WINDOW DECAL TO SUPPORT THE CHANNEL:
http://www.japandatuning.com/product-page/japanda-tuning-window-decal
')){kind=link}
Hey great video I think the issue you faced with the hose that came off was because the adapter is supposed to be 38mm
I would like a 4th gauge for volts. just cause my FC had a volt gauge.
When you buy the gauge it comes with the sensor and wiring?
How did u wire it in to switch from blue to red? I’m confused as how u did that
man….. useless tutorial. lots of steps and wiring left out
I thought my AirPods were dying in the beginning lol
Can you make a video about installing those gauges when you have a stock navigation system and where to install
What if I have a Mazda rx8 with stock navigation system I can’t do the samething
Is any sandwich plate ok to use? The link you provided is sold out
By any chance are you running an oil cooler?
Yo the sandwich plate link don’t work
pop the hood !
Which are the two most important gauge you’ll say you have because I want the three gauge set up but I’m looking to get a turbo so
Such a nasty install. Awful.
Hi interested on doing this to my rx8 any chance u could get me uk links to everything.
Hey man could you try and ypdate the links? Im a little unsure on what type sandwich plate adapter to buy and the links expired
You know that part of the dash comes off right? No need to cut anything i wouldnt think
Did you buy the 'OEM satin black' color or unpainted gauge pod? Also do these gauges have an alarm that can be set? I'd like it to beep at me if the temp goes too high or there is low oil pressure.
just installed all the gauges in my 06, everything went smoothly aside from the fact that i have a leak from the sandwich plate, it’s leaking between the adapter plate gasket and the motors housing, any recommendations? really love the new gauges but i’d love them more if it wasn’t leaking):
Does your water temp adapter stretch the hose at all? Others on rx8club said to use 34mm, but you used 36mm. Which should I go with?