Hey guys, this is my first video for car audio installs, next time i’ll make sure to use more lighting. This is an amp install on a 2005 Mazda 3, but still k…
Hey guys, this is my first video for car audio installs, next time i’ll make sure to use more lighting. This is an amp install on a 2005 Mazda 3, but still k…
You must be logged in to post a comment.
i used the yellow wire on the radio harness
what did you use as the remote wire? Is it a particular wire or did you use as cigaret lighter?
are the speakers powered by the amp to??
are the speakers powered by the amp to?
So do you simply cut the speaker wires for the rear speakers and add the rca converter wires? (Having a “Y” in the wire basically)?
damn wiring harnesses at 3:10
im pretty sure it is the same. ive seen something similar on torontomazda3 reat website for m3 and ms3
being that they didnt change the model until 2010, would this work on a 2008? ive been thinking about putting two 12″ subs in my trunk and im not sure what kind of amp to use. if you have any input, it would be greatly appreciated!
Thanks, this video helped a lot!!
The rear speakers are in the doors and would be more work with the 3.
Will this guide work if I have a Mazda 6?
why couldn’t you just tap into the back speakers? pulling out a head unit i recon is the hard way….
I’m pretty sure if you hook your remote wire to Yellow which is constant hot your amp will be on all the time whether the car is on or off. Check for switched power I’m pretty sure it’s usually red. Switched power will have 12v when the key is on and 0v when the key is off.
Great video bro! Quick question, the blue remote wire for the amp goes to the yellow constant from the car??? Also, how would I connect the front speakers to the amp if I wanted to??
futureshop, the source, bestbuy, wal mart
where can u buy that rca converter?
helped alot man thanks..good job!!
thanks dude got mine hooked up!!
by myself with no clue in the first place.
What brand is the LOC you used? Also, does it have a wiring diagram that indicates where each of its wires are required to be tapped into? Thanks!
i have a feeling it’s just all the same, your yellow, blue, and black is probably for inputs and one output. that yellow is connected to your constant 12v, black is ground, and your blue is most likely a remote turn on for your amp, so i’m assuming you won’t need to tap into the accessory wire but instead the constant 12v with the yellow wire. hope this helps
color codes are the same but my output converter has different colored wires . it has 8 wires (black grey stripe)..blue…yellow….black….(grey black stripe)… (white black stripe)….white…. grey
dude ur video help out alot nice job
heay
what is the yellow wire because i dont have mazda i whanna to know what it is
can u help me please i have just this thing i need to know
thank u very much
anyone can help
HI
i would like to know what about the remote wire Where i have you connect to what color or what kinde of the wire
to on and off
hi
i need 2 know the remote in Wiring Harness
and what collar
plz i need ur help