http://www.xenonsupply.com/mazda-3-hid-xenon-package.html How to Install HID Mazda 3 Do it Yourself Installation of HID Xenon Headlights on a 2006 Mazda 3. T…
http://www.xenonsupply.com/mazda-3-hid-xenon-package.html How to Install HID Mazda 3 Do it Yourself Installation of HID Xenon Headlights on a 2006 Mazda 3. T…
You must be logged in to post a comment.
Thanks for your video. I have no clue how you made everything look so easy, but that retention hook took me 45 mins. Thanks again!
I think my 05 has hids already, there is no wire to unplug behind the projector.
Thanks for showing the retention hook and explaining in detail. I was fiddling with it for a good 30 minutes before I ran into your video
Just ordered the 6000k kit for my 09′ 3. Appreciate the tutorial!
I got mazda 3 with factory fitted xenon. want to replace existing bulb with 8000k. do i need to buy all kit anyway ir its ok to change only bulb? Thanks
Great videos mate.. Looking forward to 2013 Mazda CX-5
no relay needed?
very good video! thank you.
stupid place to put the passenger side ballast, just hanging there going back and forth as u drive, that ballast would be shot in a month. I took my bumper off and mounted in under the headlamp on top of the windshield was bucket with 3m double side tape dose not move at all. thats how my last ballast was fucking up and never realized why, makes sense lol
How to install Cheap HID! Real HIDs are about projectors.
Do they make HID specifically for mazda 3 or H7 so you don’t need the spacer???
Retention clip problems? Use your thumb to hook it on the clip, it’s the easiest and less painful way.
thanks you.
your video helped me replace the low beam bulb and I’m a chick thanks for the Info
Does anyone know whats the cause of my HID light to turn from bright white light when i turn it on amd then later it turns yellow? The one on the right side when on the driver’s seat.
Zip tie mounting not professional.
Your battery is dusty better clean it.
Fucking bastard with your beefy hands. You had no trouble putting that clip back on. Sometimes it really sucks having these little scrawny girly hands.
I just purchased HIDs from you guys. I havent installed them yet because I know the ballasts get extremely hot and im not sure where to install them. Please help. I dont know if i should install them between the battery housing and the airbox. Ive read if the ballast makes contact with plastic, the plastic will melt.
hello. H7 model is for High and low beam?
would you be able to refer me to the same product?
would this kit work on a 2008 mazda 3 GS? and when you hook up those wires from the bulb to the ballast, what does the ballast plug into? nothing?
hi, what about SEAT, do you make kits for seat ibiza ?
I just bought Mazda 3 I sport 2012, do you carry HID bought 8000k? Thanks…
I have a 2007 Mazda cx -7. Would that kit work for my cross over? Is it the same installation? Please let me know, thank you for posting this video!
excellent video dude, but i heard the balaster can get high temperatures and is not recomended attach over plastics because can be melted. its only a comment, dou you have some problem like that? …which brand is that kit? i need a good one,, how much it cost?
Which number is for a 2008 mazdaspeed 3 for the HID and the HID fog light
fucking stupid ass wire that holds the bulb in, i fucking hate it helllla weak
Man, do you have a tuto for mazda 2011-2012? bixenon headlights?
can you damage some part of the car for a bad installation of the kit?
i want to make it by my self but i have fear broke the computer or something like that
do you have to ground the ballasts?
Do I need to disable the DRLs?
will this not blind oncoming traffic because HIDs are being installed in a halogen reflector housing? obviously this is so simple because its not a projector kit install, but halogen reflectors and hid reflectors are differently designed housings as far as i know, to create a nice clean beam cuttoff?
That’s it? You don’t need relays or something?
Excellent !!
Vital Electrocomp PCB CONNECTORS, TERMINAL BLOCKS, PCB FUSE HOLDERS, VITAL CONNECTOR, SCREW TYPE TERMINAL BLOCK, PUSH FIX CONNECTOR, COMBICON, PLUGGABLE CONNECTOR, PLUGGABLE TERMINAL BLOCK, BARRIER TERMINALS
Google Vital Connectors
H.I.D. F.T.W.
No problem hope it helps if you have that issue.
thanks alot
21 people couldnt do the installation succesfully lol
Positive is usually the non black color. Even it you connect it wrong, it should have reverse polarity protection. Negative is usually brown, black ect…