Installing faux wood blinds requires measuring the window opening in three places, picking out the correct size blinds and installing the brackets at the top of the window frame. Create a finished look to a window with tips from a licensed remodeling contractor in this free video on home improvements.
Expert: Tim Gipson
Contact: www.inhisstepsremodeling.com
Bio: Tim Gipson is a home repair specialist and remodeling contractor in Franklin, Tenn.
Filmmaker: Tim Brown
Series Description: Doing basic home improvements is a great way to learn new skills and save money. Consider putting in a pond or fountain to a yard with tips from a licensed remodeling contractor in this free video series on home improvements.
){kind=link}
Best video ever!!!!!!!!!
What size drill do I use to drill in the hole to put in the screw?
Thanks Tim!
Video is useless when you don’t aim the camera in the right direction.
i made it too. just used woodprix instructions. just click the pig on that website :)))
Check Woodprix handbook if you want to make it cheaper and better.
Thank you Tom, this sure helped me to understand….
Sorry, that is not "all there is to it". You forgot probably the only reason that somebody would want to watch the how to video – how the heck do you remove the excess bottom slats and properly re-cut the binding ladder-like strings to length without the whole thing falling apart?
very nice tim. thanks man.
I am sure that you will find good way to make it on woodprix Webpage.
Thanks for the quick, clear, quality video guide! Worked like a charm.
they need to change the camera angle to the other side, so you can actually see what he's doing
I can make it myself. Just got instructions from woodprix website and I'm ready for do it 😀
This time I'll use woodprix instructions to make it by myself.
you just saved me a LOT of money. Many thanks!!!!!
Thank You Tim I never would have install my blinds if it wasn't for your video. You made it very easy because the blinds I ordered had no directions at all. Thanks again. God Bless!!!!!!!!!!!!
Thanks for posting this. I'm a first time home owner and I have 20 windows with no blinds. This is so simple. You'd have to be a complete moron to screw this up.
You can't see anything you are doing from what directions do the brackets face to where you are drilling etc….You are talking but it is not visual. 🙁
Thanks! Just finished installing my 2in blinds in the kitchen window. Awkward to install there because of the sink and counter…but got it done. Of course, my useless drill is only a 12V so it was a joke trying to drill into the stud. Made a lot of noise and the drill bit just spun going nowhere…LOL. Tossing out as soon as I can budget for an 18V. Couldn't get the screws to go all the way in either but had extra room in the window so it still worked out nonetheless. The view out the window is to my neighbors house…so won't be pulling on the cord to open or close. The rod opening the blind slats is good enough for light and for me. 😉