How to repair a ford power window motor with a stripped out nylon clutch. This type of motor was used on many Fords from 1969 through 1991 including F150 F25…
How to repair a ford power window motor with a stripped out nylon clutch. This type of motor was used on many Fords from 1969 through 1991 including F150 F25…
You must be logged in to post a comment.
For 7 dollars you need 3 nylon bushings for all 4 Mustang windows.Nuts will
bind up and mess up the motor.Doorman window sells this and is a 15 minute
fix per window.
Oh you are so evil lol, well done :-))
First class bypass ha ha .
i suppose if you wanted some safeguard a low value resistor could be placed
in the motor feed wire and a relay coil across that resistor, the relay
contacts could be wired to the door switch.
Daft thoughts lol.
They sell the gear plugs at most auto parts stores.
you should check out Ace hardware they carry all kinds of nuts bolts and
plastic things
a piece of dowel rod with fuel line around it works the best, cut it to i
think 3/8″. it’s been awhile! (sorry) a little better than using metal
bolts that can eat the plastic, as the rubber on the fuel line has some
give!
The edges of those nuts are going to wear the big plastic gear out. Bad
choice to use nuts instead of something with smooth sides. Just saying for
future viewers.
The protection of the plastic ball pieces is so you dont break the glass if
the stopper switch malfunctions and the window continues to go up, they
should strip out before the window glass breaks
Good fix job done cool car by the way i like the old American cars
Wow, a little heavy on the grease, pump the brakes on the lube, buddy.