Check out my blog at http://the-avant-garden.blogspot.com/ Donations gladley accepted at www.paypal.com to wroughtirondude@gmail.com This is like a “For Dumm…
Check out my blog at http://the-avant-garden.blogspot.com/ Donations gladley accepted at www.paypal.com to wroughtirondude@gmail.com This is like a “For Dumm…
You must be logged in to post a comment.
I have the 180 HD and when I plug it in and turn the switch on nothing happens. The fan doesn’t turn on, the gun does feed the wire. I’m running 8/2 wire on a 40 amp double pull breaker out to the receptacle and the machine is getting juice cuz my tester shows the power cord is hot when its plugged in. Whats going on?
yeah i got mine usedoff ebay for 280…still works great
but not all the time.
To get the welder working, I just twist the handle till it works. Twist it back and it can quit.
what’s wrong with your welder
Unfortunately, I have had this welder for 4 or so years. Its not new. I just need to know how to fix it.
Yes. Faulty for sure. This should not be happening. Take it back or get a replacement. No use fighting it. Welding’s a delicate process, the last thing you need is your equipment to not function properly. In some welders they have a trgger lock which works so you don’t have to hold the trigger down the whole time (ergonomically friendly-carpal tunnel reducing etc). But I don’t think this is the case in your situation. Please let me know how it goes. Mishandling during shipping/dropping can cause
Upon further though, I have to hold the red button trigger close to its pivot point in order for it to work. I have popped the red button out accidentially a few times so Im not sure if its just needs a trigger replacement or maybe a good cleaning
my welders trigger is intermittent. How do you fix that? promig 140 as well. I have to hold the welder main trigger body a certain way for it to work cable wise. If I move the cable out of its sweet spot, it quits. Bad Cable or wires to trigger open/broke?
Thanks man. Appreciate it!
Yes for sure.
Is this a good welder for someone just starting out? Looking to do some wrought iron style gates and small diy projects. Thanks
Check out my new video just published tonight. What kind of mask are you talking about? I’d like to help you out to be successful in welding. Hit me with all your questions I’ve been welding for a long time.
Thanks for your input=) Take care.