2013 Lincoln MKX CodeP0456

2013 Lincoln MKX CodeP0456

Engine light came on and found out it was a P0456 and I decided to to the purge valve and I am going to show you how to get this done.

14,348
Like
Save


Comments

@JimDunston says:

MKX oxygen sensor for a 2013 Lincoln mkx

@Drocinit247 says:

going to try this now. I tried cleaning the EZ fill cap first for a free fix but that didnt work. Thanks for this

@environmentalbinsllc7601 says:

great info was the suv sounding bad at first i have and 08

@bahenacancun says:

Is this the same for a 2018 MKZ? I’m trying to replace that part but I can’t find exactly where it is.

@steveo6198 says:

To release the hose from the valve just push on the tab on the opposite side you stuck the pick in and it pops right off.

@MrBud007 says:

Do you know the part number for the hose, or how easy it is the replace? The end broke off

@bill40409 says:

I'm getting a P0455 code (large leak) on my '13 MKX, could replacing the purge valve be the fix? I previously cleared the code and sealed the fuel inlet with HVAC foil tape but the code came back. Pretty sure my leak is not with the fuel inlet. Any ideas?

@caseyhunt1 says:

How do I get to the fuel pump?

@malenatully says:

My noticed when I started my car this morning, had a little “shake”. Car is on but it’s “shake slightly”. Also light engine is on. Should I take to Auto zone to get it checked?

@calvinfagundes1029 says:

Just wanted to ask a question regarding the po456 code. My mkx has that code now so I will replace the valve but also at the same time my ac vent on the passenger side blows hot air. Is the bad valve causing the passenger side vent to not switch to cool air

Comments are disabled for this post.