http://www.vehix411.com This video will show you how to calibrate the steering angle sensor on your Toyota , Scion , and Lexus. If you have the TRAC OFF and …
How to do a zero point calibration on LEXUS AND TOYOTA VSC ,TRAC OFF
54
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Just Curious… with so many model cars and Suvs under Lexus and Toyota…
it would be helpful to add which numbers to select on the OBD2 connector to
turn off the VSC indicator light. I have an 01 Lexus LS430… The OBD II
looks different from the one that is shown… what two numbers on the (top
row) and (bottom row) do I choose on the ODB II connectors for a LS430
Lexus vehicle?
I tried this on a ’13 Subaru BRZ that is build with Toyota and it didnt
work 🙁
I try it in toyota prado 2011 and I made it and every thing is o.k.
How do you fix the trac off and abs light on a 90 lexus 400?
gonna try this on my 04 4runner.
Worked~! Except according to my service manual I had to Hold TRAC OFF and
then press the brake pedal 3 times within 2 seconds. Works awesome! $300
saved!
I have lexus gs 300, 2000 y. And lights Check Engine, VSC and VSC off are
appeared. Will your method help to solve my problem?
any ideas for a 2009 toyota avalon.
do it works on a 2003 toyota serquoia
good idea…..
NICE JOB I HAVE A 2002 4RUNNER
I had my TRAC OFF and VSC lights ON. I followed the instructions with a
paper clip and it worked. The lights are no longer ON now. Thanks
I had an 04 RAV4 that was in a front end collision. I had to replace all
the LF suspension. The VSC light was all that remained after the repair. I
saw your video first and was exactly the solution. THANK YOU!! Andy/Iowa
How the hell do you do this for an 03 camry xle v6?
This video is big help ! For 2003 RX300 , appears to be pin 4 and 14. Work
great !
Can u do it with a Lexus gs 300 year 2000
did this work on your 02 4runner??
thank you… this saved me a $100!!
I recently lifted my 2005 Toyota 4Runner 3″ inches in suspension and 1.5
inches of body lift and experienced the VSC system engage when I made
sweeping right turns at 25-30 mph around corners. Doing this worked like a
charm! FYI: my OBD-II connector was upside down compared to the one in this
video so I just counted from the other side. No more VSC trac system
engaging when I make normal right turns!!! 😉
will this work for a toyota sequoia 2002?
Dude, it’s not good to push that pin in that connector like that. Buy
yourself a connector kit that has that size in it so are not taking a
chance of opening that connector, which would cause no communication
problems when hooking in a scan tool.
For ’03 Toyota 4Runners: The OBD is installed upside down in comparison to
the way the OBD was installed in this video and the pings used are Ts 14
and CG 4.
How do you restart or fix the odometer on an 90 Lexus LS400 My odometer
stopped at 95k
i have a lexus 2002 ls 430 vsc light on jamp with a paper clip did not work
Here is how to do it for a 2003 4 Runner: Just google for “TSB BR005-03”
Man this is too EASY!!! I hope to heck this is what is wrong with my wifes
2003 Avalon XLS… 😀 Because a steering angle sensor is $300!!
I have the same problem. Have you found a video that helped you out yet?
Can’t wait to try this. Excellent job! Thank you.