Now my Lr3 will raise and lift up, I solved my Land Rover suspension problem in 3 easy procedures. First, I raised my lr3 and measured the height and then I check for any air leaking from the air struts. Next, I pull out the height adjustment fuse and let it stay overnight. Finally, I inspected the relief valve block.
If your Land Rover Lr3 is low in the morning or it’s rising slowly. Then, this video will solve or at least point you in the right direction in getting your Land Rover suspension fixed.
Land Rover height sensors https://amzn.to/3dIeodT
Land Rover relief valve block https://amzn.to/3byujbW
Youtube channel I use as a reference https://www.youtube.com/channel/UC_WI2JddpJlbubwii_jIYWQ
Video equipment used:
Panasonic G9 https://amzn.to/3byujbW
Olympus OM-D E-M1 Mark III https://amzn.to/3byujbW
Microphone Rode wireless Go https://amzn.to/3pRofQR
Music: https://www.bensound.com/royalty-free-music
){kind=link}
Anyone in Los Angeles knows a great mechanic for the lr3 the not expensive
Hi we have the suspension emblem on our dash but we can't find out if our compressor is the problem canni hear compressure when engine running Trev in sunny cape Town south africa 2010 model disc3
If that fuse was bad, would you still have the same problem ??
Thank you my brother I've been trying so hard to fix the problem so now I've got it fixed thank you very much Man god bless you
Excellent work. Your videos helped me a lot. Thank you!
Valve body can leak internally back into the system so it might not bubble
A great video. It's easy to get into procrastination when it comes to LR and RR suspension. Having just replaced the front air struts (157,00 miles – they were original parts) this just confirmed for me that there were no other problems. Simple and easy to follow and understand. Thanks.
Hey man I love all your videos I have a 2006 it’s always giving HDC system fault I replaced all my air suspensions but still the rover is not lifting it’s sleeping on 1 side ( I charged a dead battery and fitted it) if you could help it would be great thank you
Thanks for sharing. Great video
Loving Tour videos! Thinking of buying an LR3 for off-road ventures and daily. Thanks for putting out useful material and Roll Tide… I mean go Longhorns… sorry…
Great video… so at the end of the day what was the fix?
I'm having the same problem and took it to the mechanic both said it's an air leak but I doubt because it can't be both at the same time. But my air compressor never stop when the engine is on. Any advice what's that might be? Also I have air spring air supply code c1130 and c1a03 left hight sensor and some other lost communication module
How to replace front and rear signal bulbs, notice fron lights are different om my 2007 land rover, instructions please on how to Install .
Just wanna say thanks .
I have an issue ,and it is sometimes when driving landrover, my radio and dash gone ,then start lights flashing blinking and after few minutes again back ?
fantastic video , gonna try this on my sport as having fault showing on dash but nothing coming up on the diagnostics when plugged in
I watched your video researching Suspension Fault for my 2017 Disco Diesel. I don't know if this applies to my model but I will start with your process. Excellent video and very clear.
Question; I need to change my Tensioner on my 2005 LR3. Is is necessary to remove the fan also? Let me know please. thanks.
You are a genius.
Oxman, Thanks for supporting us LR3 and LR4 owners. I happen to own both models. Appreciate you. Cheers!
Any updates on this, did replacing the sensor fix the issue? I am having the issue. But all four suspensions are flat down to the tires touching. Both air suspensions and air compressors are relatively new. But yeah, I got suspension fault and it wouldn't go up.
Thanks
Thanks for the video! My air compressor work only around 15-30 sec and it stop and the suspension light go on in the dash!
My compressor is new.
Anyone have a idea what it could be?
Very helpful
Hi brother, here's my problem, and I'd appreciate your opinion. My 2006 LR6 would go down gradually to the bumpstops in about 3 days. Both sides equally, not the rear just the front. No bubbles that I could see anywhere. So I bought a front relief valve on EBAY ($57.00), so exchanged and now the front (only the front again) goes down in just a few hours and the car says "suspension going up slowly", which didn't happen with the original one on. Now …. either the valve I bougth on EBAY is defective or the problem is somewhere else, I just can't think WHERE.
So… what you think. Maybe buy an OEM ( $200.00 and no returns)? Can you think where else could the problem lies. Wouldn't the middle valve block make the rear go down too if that's where the leak is? Thanks , and I know you're not a professional mechanic, but I like your detective way of thinking, kind of like mine.