Thank you for posting this video. It's been really helpful to us all in understaing how these modules work exactly. I managed to remove mine from a 2010 RRS by watching your videos in this series and I have just changed the gears in the gearbox. Similar to yourself, I just changed the gears for the clutch part as the other gears looked good. Waiting on new cables then I'll try to refit and calibrate the handbrake shoes. Thanks again!
hi, i've been following you with great interest since i bought a range rover sport 2012. a few days ago while driving the car i heard a loud hiss from under the car the handbrake won't come off i tried to pull the release wire of the device but the car remains braked I want to clarify that underneath there is not a thread of rust it looks like a car with no more than 3 years of life I cannot understand why by pulling the release thread I cannot move it even to get to the workshop.
So if it’s making the first sound you showed its because it’s tightening up too much? Is there any adjustments that can be done before going thru all of that work?
my focus cmax is doing exact same thing i have ordered same gears hoping they fit how much travel do you alllow on the travel of the brass rod ? square when its working
If you pull the emergency release while the Range Rover is stuck in park would that cause damage to the teeth of the gears or is the park brake module ok ?
Really good video mate, did it work though with no issues when you put it back in? Going to tackle mine soon, it’s a biatch to get to though even through spare wheel as bloody spare wheel bracket in the way
Mine is doing that funny noise. Do you think I may just do what you did, without undoing anything, to see if it puts everything back in working mode : Pressing the brake pedal 3 times then releasing the handbrake?
Thank you for posting this video. It's been really helpful to us all in understaing how these modules work exactly. I managed to remove mine from a 2010 RRS by watching your videos in this series and I have just changed the gears in the gearbox. Similar to yourself, I just changed the gears for the clutch part as the other gears looked good. Waiting on new cables then I'll try to refit and calibrate the handbrake shoes. Thanks again!
Thank you a lot for this great video! It is helping a lot to service parking brake. of my LR Disco 4. Best Regards. Aro from Eiselfing, Germany
hi, i've been following you with great interest since i bought a range rover sport 2012. a few days ago while driving the car i heard a loud hiss from under the car the handbrake won't come off i tried to pull the release wire of the device but the car remains braked I want to clarify that underneath there is not a thread of rust it looks like a car with no more than 3 years of life I cannot understand why by pulling the release thread I cannot move it even to get to the workshop.
So if it’s making the first sound you showed its because it’s tightening up too much? Is there any adjustments that can be done before going thru all of that work?
Gday Steve great video tho you should’ve been home in land of nod just like teddy boy
Thanks for sharing. Very informative.
Your cough is from air conditioning from car or building.
My 1st ever comment on YouTube video. but this I couldn't hold myself, fantastic really.
Do you have a part number for the cables please boss
When you change the shoes , does ot give you more adjustment, and then relatch itself
my focus cmax is doing exact same thing i have ordered same gears hoping they fit how much travel do you alllow on the travel of the brass rod ? square when its working
If you pull the emergency release while the Range Rover is stuck in park would that cause damage to the teeth of the gears or is the park brake module ok ?
Thank you excellent video helped me out for my job
Хорошее видео, спасибо за видеоматериал, поправляйся скорее Стив, некогда болеть)
I have experience with Britpart components and agree that they are dog poo!
What a top mechanic wish I had half your skills could do with you a bit nearer got issues with my discovery 3tdv6 s
Really good video mate, did it work though with no issues when you put it back in? Going to tackle mine soon, it’s a biatch to get to though even through spare wheel as bloody spare wheel bracket in the way
I’ve had that make of stuff before and the quality has been sh#t as well made in China rubbish
This is a really informative video!! Thankyou for taking the time to make this video!!
Mine is doing that funny noise. Do you think I may just do what you did, without undoing anything, to see if it puts everything back in working mode : Pressing the brake pedal 3 times then releasing the handbrake?