Hi – I’m hoping you (or anyone) can help. We have got a short rail with the
bars but we have no instructions and I can’t find any online. We can’t find
any bungs in the trim to fit the rail to (I assume thats what we are meant
to do?). Are we supposed to drill these or does the short rail fit in place
of the trim? The screws in the car are 10mm so I guess they don’t fit
through them? Although in your video they look different on top to ours?
I really wouldn’t recommend using a flat bit (spade drill) for enlarging
the hole in the aluminium trim, there’s a high risk of cutting yourself or
damaging the trim. Cone cutters or stepped drills are designed for this
purpose are not expensive and are much, much safer.
')){kind=link}
What are the rubber bits called that go into the channel? I need to
purchase some replacements. Help anyone? Thanks.
Hi – I’m hoping you (or anyone) can help. We have got a short rail with the
bars but we have no instructions and I can’t find any online. We can’t find
any bungs in the trim to fit the rail to (I assume thats what we are meant
to do?). Are we supposed to drill these or does the short rail fit in place
of the trim? The screws in the car are 10mm so I guess they don’t fit
through them? Although in your video they look different on top to ours?
I really wouldn’t recommend using a flat bit (spade drill) for enlarging
the hole in the aluminium trim, there’s a high risk of cutting yourself or
damaging the trim. Cone cutters or stepped drills are designed for this
purpose are not expensive and are much, much safer.