how to change a oil filter on a land rover freelander TD4

how to change a oil filter on a land rover freelander TD4

Created on May 20, 2011 using FlipShare.

25
Like
Save


Comments

markraptor50 says:

Hi mate, thanks for the advice was not blowing but bought the car at 123500
miles so had to service it!! Was real bad!! All good now but who would of
guessed that filter was there am gonna make a video for all to see thanks
for the reply and help.

markraptor50 says:

Hi mate any idea where the breather filter goes on that engine not the air
filter. Please help!!

Shawn Frizzell says:

nice tutorial id like to add workshop manual suggests you put a rag over
the top of the alternator because as you demonstrated oil can contaminate
the alternator and kill it . 

Liamautomechanic says:

@lakay20 32 mm socket and long bar and rachet

gdefendi says:

C’mon Buddy, doesn;t need to take the top cover, go straight to the filter
cap.

hp11208 says:

do u have to siphon out the remaining oil in the filter area

Liamautomechanic says:

if its fitted with the BMW donkey, u can use a large socket to remove the
oil filter cap, if u havent go a set of oil filter removal caps. the older
freelanders u take the filter off from the bottom with the chain strap.

Edward Bahaw says:

Is there a top and bottom of the filter element? Which side faced up?

Bob Blewitt says:

Cheers Liam another good one to the TD4 collection

Ian Brewster says:

Under the car there is a sump guard, you have to remove that first to get
access to the filter

idmcsniper says:

Just a thought, Is it not a 36mm socket to remove the filter ??

Liamautomechanic says:

@hp11208 no

132706rqc says:

can you show me how to change oil and filter on freelander petrol engine
i’m having a hard time looking for the the drain plug ang oil filter,
thanks!

Liamautomechanic says:

usually it will say TOP. or the manufactures name, faces up. or some will
go both ways.

Liamautomechanic says:

ok buddy.

anthony preston says:

Thanks for taking time to do this it’s people like yourself that save us
40pound an hour plus vat cheers give power back to the home mechanic

lakay20 says:

what is name of the tool you used to open&closing the oil filter
screw?because i want to change my oil filter by myself.to save money from
the mechanics.thanks!

Write a comment