Easy DIY Gull Wing Windows! Cherokee, Land Rover, Toyota, Wrangler 4X4

Easy DIY Gull Wing Windows! Cherokee, Land Rover, Toyota, Wrangler 4X4

Easy DIY Gull Wing windows! Cherokee, Land Rover, Toyota, Wrangler 4X4
This simple modification can add a ton of extra accessibility and this how to video can give you ideas on how to make this yourself. You don’t need high end specialty tools to build a project like this! A jigsaw, drill, angle grinder and a tap and die set are really all you need. ANY 4×4 or offraod suv can be modified like this! All it takes is some creative thinking and basic hand tools!
Enjoy the video!

AMAZON ITEMS!!!   https://www.amazon.com/shop/dirtlifestylenate
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: “dirtlifestyle” 10% off
EMPIRE ABRASIVED 10% OFF: “dirtlifestyle” https://bit.ly/3bl6h3K
JOOLCA HOT WATER HEATERl:  https://bit.ly/37qLgEp
YANKUM:   http://yankum.com?afmc=1l
ONX MAPS:   https://webmap.onxmaps.com/account-purchase.html?app=offroad&product=offroad_premium_year&fpr=nate12
MIDLAND RADIOS: https://bit.ly/2IjmlZD

*Shirts & Hats on our website!!*
https://www.thedirtlifestyle.com

Support us on Patreon!
https://www.patreon.com/dirtlifestyle

Follow me on social media!!
Instagram: https://instagram.com/dirtlifestylenate/
Facebook: https://www.facebook.com/dirtlifestylenate/

DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#fabrication #offroad #overland

334,213
Like
Save


Comments

Crazee Cris says:

You need to use 2x gas struts so springs open all the way from opening to full with your hand lifting it

Michael Ciepacz says:

Great Job . What is the proper name for the lock you using ?

Nemesis 851 says:

Top hinge bolts (outside) security risk.
Remove the bolts and thief is in.
But i love the idea- Gull wings at back

Slim Pickins says:

I have a question: why did you not just hammer the pieces into a curved state? I think I would do that. It would tend to make a better seal, wouldn't it?

Grahame Roberts says:

One side had the radio antenna. Did you install an old style stick antenna somewhere?

Cheese Bob says:

Him: "So get another person to catch the window from the outside"
Me: "but i dont have any friends… Now i have to diy a window catching device…"

Mark Walker says:

You have a hell of a nice garage there. I would kill for something like that. Hell, I would kill for just a single garage.

WES m says:

Misleading, Not windows, access panels.

Greg Norvell says:

Cant wait to get my kitchen remodel done so I can get back out to the shop! Wanna build a set for my Cherokee.

Mikael Edman says:

No no no, hinges and lock is mounted on the inside. Look how its made on a camper

Josh Ribeiro says:

Your tattoos are sick!

der Jack says:

"I like to do things in the go…"
"the window seals are too thick… "

Traky boy says:

The first gasket is great…
So, perhaps, the hinges needs some shimming OUT ??

Joey Jaramillo says:

Great build. I want to do this on my E350 van What was the type of latches called again?

Ismael Torres says:

Hey I need a band saw table like u we’re u get it I have a band like yours

Vibold Sok says:

I love how detailed you are. This channel is just pure gold.

Jason Helmes says:

Should have used spring hinges no need for struts

Tyson Sparks says:

You are amazing

Jonathan Schuler says:

Hello.. just here to say, you cannot call that gull wing

Josh Reeves says:

You can get everything you need on amazon…breaks out plasma cutter..

Matthew Brown says:

I own a Disco 2 2004 in the US and it's my "family suburban," and I'm in the process of purchasing a Disco 2 TD5 in Africa for our Africa-side "family vehicle." Really love this gull wing idea and that it was done on a Disco!

John H says:

The next video is the box inset in the window right?

MyOneBlack Friend says:

Thank you for sharing your knowledge. I appreciate it.

Jose de Sousa says:

You should try a seal with the tubing on top.

Jose de Sousa says:

Best to fit two locks one on each corner this way the corners will hold the Gul door snug.

Jose de Sousa says:

You could fix the hinges with stainless steel pop rivets

King of Baja says:

anasını satayım çok mantıklı lan. saol ramo.

Kymo Nixon says:

Anyone know how much cost in parts were

Comments are disabled for this post.