LRs are known for Air Suspension faults. Mine stopped working all together and laid on the ground dead to the bump stops. The LR3 still ran and drove, just while on the ground. So I built this kit so I could manually pump up the Rover and put it in the air and drive again.
Here are the links to materials used.
Air Hose:
https://amzn.to/3kWh9O6
Extra T Fittings:
https://amzn.to/3HisnnK
Schrader Valve Connections:
push to fit:
https://amzn.to/40bQ1ei
Compression fit:
https://amzn.to/3XSRqVI
This is useful in many ways. If you are Offroad and have damage to your system, you could still inflate and get home safely. Also if you are offroad and high center, you can add even more air to get a sky high lift and get yourself off the obstacle.
Additionally you can inflate or deflate each corner individually. Overall this was great and put my LR3 back in action.
){kind=link}
Excelenet video pal. As a back up and emergenciy is great to know the locations and the tube color meaning. save tons of time.
What an amazing way to stay on the road . Wish I Hd seen this when compressor when out in the dessert and had to come in a tow truck that cost me 900 dollars . Thank you for this ..
Gonna try this.
Where did you get all the stuff from like 3way connectors and other things for the compressor?
Probably need to pull the 3rd fuse to turn off the computer height system . Nice work
where did you get those Schrader Valve's all I can find here is 1/4 thanks
Can you tell me exactly where you got the sheader valves from? Looks like a compression type fitting and I can't find them. thanks in advance.
Can you add a link of the exact parts you got. Plaese