★How to install LED lights to a car 【Only with $3】★

★How to install LED lights to a car 【Only with $3】★

THIS is where YOU should start! (Read below for more info) How to install switches: http://www.youtube.com/watch?v=KXuAz-pY4sw ☆YOU WILL NEED☆ (Read more bel…

1,398
Like
Save


Comments

TT01RCDrift says:

THANK YOU ALL FOR 200,000 VIEWS!
You guys are awesome!!! 😀

—TT01RCDrift

ihsanm says:

I’ve been looking for wires. I bought the wrong ones. They were too thick.
Anyone know stores that sell really thin wires?

Geoffren Hernandez says:

Be better to have a switch to turn them on n off when I want it

thekillersnake94 says:

Pretty straight forward and informative.

CoolJbob says:

So I tried this and I messed up something I believe it may have something
to do with the security code Im not sure I have an after market radio
installed in my 2004 impala and Now My car wont start all my lights just
flicker now

Slender Dragon says:

#LED #CarLights #DIY

Francis Xavier-Rabanes says:

The Music is soo sad! I think im going to hang myself with the LED lights
instead of installing them on my half dead 82 corolla. Good bye cruel
world. xx.

bacardiconlimon says:

Your DZR6679 license plate from Hawaii should have been covered.

adrianjayden1228 says:

I can read the plate .. lol .. but good stuff

oceantrolls73 says:

great vid. thanks for posting. 

Aaron Lee says:

thank you for the video. i was looking for the current tester like your one
but i couldn’t find it. where did you get it? could you please link ebay
address like same as your current tesster?

Reggie Lansang says:

He made it so complicated when you can install it without all those bs..lol

Mrhevytanker says:

DZR 6579

MICHAEL ULRICH says:

To JLRD16- you have to hook the wires to a fuse point that is not powered
all the time, like an acc fuse. which stands for accessory. You can usually
find that fuse in your cars owner manual. If not get a tool from an auto
store that checks power (one that lights up).

daniel gallardo says:

The music……

Gallardo983 says:

Hi, I have 2006 civic pretty much same. Can you tell me how to wire the
positive wire to the fuse box, like how to actually plug in the wire into
the fuse please with pictures or a video? thank you

Masagus Budhy Firmansyah . says:

thanks a heaps for your upload, dude. clear and concise tutorial vid!!!

kaulike1313 says:

will the led lights drain my battery????? :)

cloud amlap says:

is this set up always ON even day driving???I want a set up as easy as this
but only lit during night or when you turn ON your headlights or daytime
light?any idea how to do it?and will not drain my battery.or just tapping
it on any wiring of your headlights?
thanks!

etsch146 says:

is it bad to install leds right above the throttle body?

xing chen says:

dang i just got caught by the police in md so dont use blue light maybe
white one will work, going to court soon shhhhh

Ali Mahmood says:

How do i attach led wire to the fuse? do i attach a wire inside the fuse?

TT01RCDrift says:

Thanks for your comment!! Glad to hear that.

TT01RCDrift says:

You can just pick whichever source you’d like, and connect both positive
wires to it. There is no need to find separate sources for the right side
and the left side.

TT01RCDrift says:

Yes, one for the power source and one for ground.

TT01RCDrift says:

Sorry I don’t have Kia……

bosco huang says:

nice one. can i do the same steps on my accord? if so ,will it hurt the
electrical system or the fuse box? and what you,use to connect the fuse box
with wire ?or you just connect with wire without anthing to hold the
connect ? thx

Lynnstrum says:

You still have to know more then just the plate number to track someone
using it. And of-course there are people smarter than myself out there.
However, a number alone can’t get you any information on someone. You can
buy a car, get plate number XYZ123 and I can buy a car and get that same
plate number, as-long as it’s registered in a different county. So go
ahead, try and find out any information on this plate in the video, I
promise you you’ll get many, many different results.

jasonkgps says:

Pretty crappy installation job but it looks nice from the outside.

TT01RCDrift says:

Yes, that will work just fine. You might find it easier by using crocodile
clip.

TT01RCDrift says:

Thanks for your comment! Great to hear that from you!!!

DjordjeSrpski says:

in some countries you need papers, in some you dont. Better check the law
in your country..

Jim. E. Rustle says:

My fuse box is from the inside of the car (under the steering wheel). Any
tips on how to run the wires to the front of the car?

MrRangerZr1 says:

I have a odyssey with a radio code So do i DISCONNECT or DONT DISCONNECT
the battery

leftnutt1 says:

can i use wire that i use to connect amps and speakers with? also what is
the wire from the led connecting to?

xXthewigglerXx says:

Buy em already made for 5.79$ lolol

TT01RCDrift says:

Glad to hear that the video helped you! 🙂 You can just wrap the positive
side of the wire to metal part of the fuse, and connect the negative side
of the wire to any part of body frame. There is a link to a picture that
shows how it looks like in the description box. I hope it makes sense.
Thanks!!!

MrAmoney224 says:

I got everything together but when I look for the ACC fuse all the fuses
light up when the car is off is there any other way I can find it

TT01RCDrift says:

Yes, you got it right. You can solder two wires into one, then connect it
to a fuse. Thanks for watching!

TT01RCDrift says:

Hi, thanks for watching the video! Yes, you can use this strip too.
Actually, this is brighter than the one I used in this video. I like it
better. 🙂 I would recommend soldering no matter what you are using. Just
for your safety. Thanks!

Nunion says:

I agree with Stuffyou100. Otherwise, a very good video. Great for newbs.
I’m wondering if you are attaching to a rear light, if you can’t just use
‘quick splice’ clamps to splice to existing brake and/or rear lights. Would
that be sufficient? I assume it depends on the ‘draw’ of the LEDs being
used?

J- YO says:

Is this illegal in Canada?

collymtz24 says:

leds 12 volts so you need to conect fuse 10 no 15

TT01RCDrift says:

Wow, how did you know that!? I thought I hid it…

WMC DEADLYKiLL says:

Really thank you man. This video is really great and helpful!

Jimbob91190 says:

When i wire it up like you said the lights stay on all the time even
without the ignition turned to ACC :/ any help?

pivitman101 says:

What else could you use besides double sided tape?

Skimmt says:

Just check them and try. Northing will happen if you switch them by accident

Write a comment