Car Fix DIY Videos

Buy Now!
New MAP Sensor from 1AAuto.com https://trq.video/ia-1AEMP00025

This video shows you how to install a new MAP sensor from TRQ on your 2007-2017 Jeep Patriot (2.4L L4). The Manifold Absolute Pressure (MAP) sensor measures the air coming into your fuel injected engine to determine how much fuel to add to get the right mix. A failing or failed sensor will contribute to rough or inefficient running engines. It will likely also trigger a check engine light. Replacing a failed sensor should be a priority.

Estimated installation time for a professional technician is approximately: 18 minutes

This repair was done on a 2016 Jeep Patriot Sport 2.4L Sport Utility 4-Door 4WD Manual and the process should be similar on the following vehicles:
2007 Jeep Patriot
2008 Jeep Patriot
2009 Jeep Patriot
2010 Jeep Patriot
2011 Jeep Patriot
2012 Jeep Patriot
2013 Jeep Patriot
2014 Jeep Patriot
2015 Jeep Patriot
2016 Jeep Patriot
2017 Jeep Patriot

Tools you will need:
• 7mm Socket
• Needle nose pliers
• Needle nose pliers
• Gloves https://trq.video/ocmN-1AXSS00048
• Safety Glasses

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.