http://www.1aauto.com/1A/fog-lights/Jeep/GrandCherokee/1ALFP00052 1A Auto Shows you how to install, repair, fix, change or replace a broken, damaged, burned …
http://www.1aauto.com/1A/fog-lights/Jeep/GrandCherokee/1ALFP00052 1A Auto Shows you how to install, repair, fix, change or replace a broken, damaged, burned …
You must be logged in to post a comment.
){kind=link}
one question, i have a 2002 laredo 4.0 I-6 and the fog light spots have
plastic bar-like things in the way? is there a way to just cut it out
without having to get a whole new front bumper?
do you know if ts the same process for a grand cherokee 97? thank you
good
We don’t. If you check out the jeepforum com one of the members may be able
to tell you how to enable this feature, and what parts you may or may not
need. Hope this helps you out.
The part # is 1ALFP00052 or you can call Tony @ 866-403-3393
It should be a similar process. They shouldn’t be very difficult to replace.
Thanks for watching. 1aauto.com 888-844-3393
You may want to check to see if there’s power to the plug that the light
plugs into.
@RayStyles300 it iss!
You may want to check the JeepForum com to see if any members have enabled
this option. It’s a really good site dedicated to Jeep enthusiasts of all
kinds.
Great video. I also like that you showed the different types of headlights.
@1aauto I stuck my hand in there behind the plastic trim you can feel the
bulb assembly, just turn counterclock and pull out. I already replaced mine
it was so easy.
5:50 zooom zoooom zooooom lol hilarious! great video tho 😀
por favor con subtitulos en españollllll
is this the same way for the 04 Grand Cherokee rounded fog lights?
Guy knows his stuff. Excellent job!
I have a 2004 WJ that didnt come with foglights yet I want to install. I
know there are full kits that have controls for the interior and everything
I guess I have to hacksaw the stupid plastic pieces blocking where the
lights should be! urgh! I think I might have to get it done professionally.
@katch26 This video will show how they are secured in place on the bumper,
if you’re trying to add the factory fog lights.
Could you make a video on 2004 Jeep Grand Cherokee fog lights?
is this pretty much the same if you wanted to add the housing?
So do you guys have a video for installing them when for example mine never
cam with fog lights?? It’s a 2000 Laredo
This video should show you how to replace the fog lights on your 2004 Jeep
Grand Cherokee.
Thanks again. What part number is this on your website, so I can order two?
@MarkN1965 The lens isn’t removable. It’s fused to the housing.
Just want to know if the lens is removable? I know it has one of those star
screws on it but is the lens sealed to the fog light houseing? I have a
water leak and want to reseal it when I replace the bulb.
This video was a lifesaver!! Thank you so much for showing this. I needed
to replace a bulb and had no idea the bolts where behind the bumper like
that.
i did everything you said but the left side foglight dint turn on
Thanks. However, my fog lights are round. I think they are part number
1ALFP00154. Is the install process difficult? I will try to give Tony a
call as well.
Thanks also wjjeeps is a great site. Thats where I learned of the kits.
Another helpful video! Thanks a lot!!
@RayStyles300 Don’t have an 04 to look at so I can’t answer for sure. Maybe
another user can verify until I can get a peak at one…