Car Fix DIY Videos

I have a brand new-to-me Jeep Gladiator Mojave and I would have much preferred to be out in the desert putting her to the test, but I’m still under doctor’s orders of no off-roading so we’re going to do the next best thing and work on the Mojave.

In this video we’re going to be installing the Mopar OEM equipment for the 115V bed outlet. I chose to go with OEM because I thought the install was pretty simple and the Jeep was already setup for the outlet, at least for the most part.

The other reason I wanted to do this video is because I hadn’t seen anyone on YouTube using the JScan tool, which for me was the lowest-cost option. The other options out there are using the Tazer that costs around $400, or a trip to the local dealer that would have cost me well over $100 to program the onboard computer to activate the outlet switch.

Thank you for watching 🙂

Part
Part Number Part Name Quantity
6NU24TX7AB Headlamp Switch Bezel 1
68370049AA Inverter Switch 1
68398209AB Jumper Wiring 1
68312754AC Inverter Power Outlet 1
6104610AA Tapping Pan Head Screw and Washer 4
6509748AA Plastic Nut 4
JScan Application Download from Google/iPhone 1
Jscan License Purchase in JScan Application 1
Vgate iCar Pro Bluetooth 4.0 (BLE) OBD2 Fault Code Reader 1
(ASIN B06XGB4873)
Cable Adaptor for Chrysler 12+8 Programming Cable Connector 1
(ASIN B08ZL4LRVK)

Chapters
00:00 – Introduction
01:30 – Parts
02:53 – Phase 1 – Outlet Install
07:52 – Phase 2 – Cabin Outlet Switch Install
15:04 – Phase 3 – JScan Reprogramming
19:27 – Testing
20:48 – Outro