I used Quaker State back in the day. But, there was always issues with it
cooking and melting to the inside of the pan and engine. How does it do
now??
Good video BUT the manual calls for 10-W30 oil for this vehicle. A fram
filter?? You can use a Motorcraft FL-1A filter (same thread size) or a
Bosch equal to the FL-1A.MUCH better filters and since they are larger you
have more filter surface area and it also increases capacity about another
1/2 quart Before adding the oil you can turn the ignition half way then put
the vehicle in neutral and it will ease down the ramps so its level to put
in the new oil.
You’re right about the oil…but i’m a light use / FE kind of driver. Fram
filter’s suffice because I change oil right on time. Good comments and
Thanks for watching!
i just got my 2000 jeep cherokee and the perform service light is on. i
have been told it is the warning to change oil and i have but i can’t get
the perform service light to reset or go off. just got this car and i am
about to do my second oil change. any suggestions on how to get this light
off?
FRAM SUCKS! use wix or mobil1
I used Quaker State back in the day. But, there was always issues with it
cooking and melting to the inside of the pan and engine. How does it do
now??
Nice…. Body style looks exactly like my 2000 laredo. Cant wait to do it.
straight six not v6!
Thank you for the video !! Easy and simple (:
1RICKDAYTONA i see a 6Cyl
10w-30 yes in manual…. but not in the winter .. 5w good for winter
Thx for watching.
Good video BUT the manual calls for 10-W30 oil for this vehicle. A fram
filter?? You can use a Motorcraft FL-1A filter (same thread size) or a
Bosch equal to the FL-1A.MUCH better filters and since they are larger you
have more filter surface area and it also increases capacity about another
1/2 quart Before adding the oil you can turn the ignition half way then put
the vehicle in neutral and it will ease down the ramps so its level to put
in the new oil.
True, but alas…we all make do….thanks for watching.
Very informative,thank you.
Thanks for the video, man.
@ roony ruiz how hard is it to change to tranny fluid and the filter???
I use a lighter weight. Preference.
Great – thank you
You’re right about the oil…but i’m a light use / FE kind of driver. Fram
filter’s suffice because I change oil right on time. Good comments and
Thanks for watching!
Thanks guy!
When changing oil the vehicle should be on a level surface
wrong look up the manual … check your info before u go all high and
mighty correcting people
great video
In Line it is. I mis spoke. Thanks.
only takes 4.7 – 5 quartz for most engines including V-8s. 6 is too much…
That’s not a bad idea. I just like it cool for safety. As long as you
change the oil on schedule you’ll be doing really well. Thx for watching.
clean car, clean yard, clean oil, clean cloths….thumbs up!
i just got my 2000 jeep cherokee and the perform service light is on. i
have been told it is the warning to change oil and i have but i can’t get
the perform service light to reset or go off. just got this car and i am
about to do my second oil change. any suggestions on how to get this light
off?
I have the same Jeep, though I keep reading everywhere that I should use
10W-30
Thanx for the video
hot weather yes cold weather use 5W-30
I thought u had to let it run for a min then change oil while warm.
А что это за тяга К коробке крепиться снизу в месте соединения ДВС и АКПП в
начале видео. у меня такой нет.
Thanks for posting the video but its a inline 6 cyl not a V-6
True True. I misspoke. Thx for watching!
cool video baddy but is 6 in line no v6