If you want to make my day, you can make a 1 off donation to buy me a virtual tea or beer here: https://paypal.me/realracingguru
Cheers
Twitter: https://twitter.com/RealRacingGuru
Google Plus: https://plus.google.com/+RealRacingGuruOfficial
If you want to make my day, you can make a 1 off donation to buy me a virtual tea or beer here: https://paypal.me/realracingguru
Cheers
Twitter: https://twitter.com/RealRacingGuru
Google Plus: https://plus.google.com/+RealRacingGuruOfficial
Comments are disabled for this post.
Thanks for the Video. I have the same similar issue but the fault code was P1601 for the Transmission Control Module. And I was told that the TCM needs to be coded but we changed the ECU, Cluster, Key, BCM. Because it was written on the Dashboard Security Failed that is why we changed that. And the Car is starting now. But GEARBOX FAULTY still on the Dashboard. Please any advise
Hay look I don't know if u will read this but if you still have the xtype and still remember what happened when it happened or at least tell me what side effects happend (like headlight won't work) I have the same codes and p1643 for the fuel pump monitor low input and p1643 gear box fault any help is appreciated
I have a 2005 Jaguar X Type 3.0 and it's stuck in neutral when it's in park I am lost would the transmission control module cause that
Hi I'm replacing this module, does it need to be coded to the car?
bless ya x there is a pretty damn good video now x .. same upholstery as mine "champagne leather "
What scanner did he use
Did you seal the new tcm before you reinstalled it ?
Hey is there someone in the valley that can help me with that ?cuz my car has that problem but I can't seem to find anyone who does that around here.
Hi RealRacingGURU, I have a P1799-00 CAN transmission control module/ABS control module circuit malfunction, P1719-00 Engine torque signal, U0001-88 High speed CAN communication bus, P0500 vehicle speed sensor circuit malfunction, U1039 SCP (J1850) invalid oir missing data for vehicle speed and P1700 Transmission indeterminate failure, P132B Turbo boost control A performance
2008 X-Type 2.2d Estate (90k km): usually but not always I get the spiral indicator lighting up and a message "transmission malfunction" when starting the engine and in gear selector "P" position. Then I turn off the engine, restart and usually it's ok then, I can drive as if the car would be 100% ok. Lots of codes and I am asking myself if the canbus itself has a problem or if some of the control modules (TCM?) might be broken? May I ask you for your thoughts? Battery is 100% – I had it tested at the battery center.
t.me/jaguarxtypeworld
Thanks! Great video. The damn X-Type is so unreliable
good video well done I have had this gearbox fault for 1 year and its been a thorn in my side every time my girlfriend talks about my jag and how it is a piece of crap .. I hope this fixes it.. where can I buy the TCM? Napa doesn't sell it
Awesome fix
Thats crazy… People dont know this … You should rename ur video… Jaguar x type gear box fault fix… It will get famous
Sir.is it possible to reset or flash the module,I have a 1990 xj6, in limp mode,fix problem but still in limp. Any help much appreciated. Thank u.cheers
tengo este fallo pero solo limpio la computadora?
Hey guru why are you doing the real life jaguar instead of real racing?
Have you played project cars 2?
Guru what cars do you have in real life?