2011 Jaguar XJ V8 5.0 camshaft position sensor B1 S1 DIY

2011 Jaguar XJ V8 5.0 camshaft position sensor B1 S1 DIY

DIY Camshaft position sensor B1-S1

4,972
Like
Save


Comments

nazar baczynski says:

Hi.Do you have diagrams synchronization for this car?

Daniel Kaesberger says:

Cel comes on after 2 ignition cycles on ford

Shandell White says:

Where is bank 2

george franc says:

Hello there. Thank you first for this video. I was searching for this cam position sensor issue and I came across this. So I have a jaguar 3litre v6 diesel 2013. My car has run about 97,000kms as on today. Am from India. And just yesterday my jaguar service mechanic says the car starts And then goes some distance and then it stops while running and then after a while try to start it doesnt start later after repeated try it starts and then car moves a small distance and stops while running and the mechanic at jaguar service says my cam position sensor has to be replaced and to fix this they have to remove the gear box and while removing this to access the sensor many other parts has to be replaced. I do not know exactly where is this sensor placed for my jaguar model. Could you please help me guide on this? Because the mechanic says I have to pay about 2000$ dollars almost to fix it. And i am not sure if its the cam position sensor which is gone or is it some other issue here. Which is worrying me. In need of help soon. Thank you in advance. Cheers.

derony jones says:

Where is bank 2 sensor A located…. same exact car

VIBE says:

Hey is this the same engine with the one on the land rover range rover 5.0 engine?

Ryan Smith says:

Is the 2015 XF going to have it in the same place

Auto Trimmers says:

Are these cars expensive to maintain??

Trenton Davidson says:

How many sensors do a jaguar xf 2.0 2015 have

Mike Fuller says:

is bank 2 sensor A the sensor on closest to the middele of the care (intake i assume) or the sensor farther from the cetner of the car?

eric cooper says:

I have a 2011 Jaguar XF 5.0…. when I cold start it idles up as normal but then when the idle down I hear a knocking sound for about 5 mins then it goes away as long as the engine is running…. when I turn it off go in a store and come back out… sometimes it knocks on start up sometimes it doesn't….any help will be appreciated. Thank you!

Kevin Plantamura says:

How many miles on the car before cam position sensor install?

And are the cam sensors interchangeable ?

Fam 1 says:

What codes were you gettin?

Jacob Olmos says:

What issues does the crankshaft sensor give you when bad?

Kierra T. says:

Nice video.

Kuteemichael Michael says:

Thanks kenny

www.ariah.com says:

great work bro

Comments are disabled for this post.