Hey guys I finally made a video showing you how to replace the 3 motor mounts on a Infiniti G20 that comes with a sr20 engine. Now this process with apply to vehicles that are equipped with FWD sr20 engine such as the Nissan Sentras that were produce around this time. You will also find this information helpful if you have a Nissan Altima, Nissan Maxima or an Infinti i30 since Nissan used similar crossmember supports. I didnt do this but Its recommend that you replace your crossmember bushings if you are replacing your motor mounts. Also If you are attempting this repair please make safety your number one priority. If you found the information In this video helpful please make sure to give me a thumbs up! I hope everyone has an awesome day and I will see you all In the next video!
If you wish to contact me for any reason you may do so at my email
earaujorojas@gmail.com.
Follow me on Instagram to get sneak peaks of upcoming videos!
https://www.instagram.com/ericsdiygarage/?hl=en
Check Rock Auto for parts used in this video
Front
BECK/ARNLEY 1041453 {#1030728, 1041334, 112702B010} Info
Rear
BECK/ARNLEY 1041333 {#1041177, 1041360, 113202B000}
PIONEER 607312
Front Right
how long did it take you to replace the front and rear mounts?
No entiendo ala verga el puto ingles
I just broke one of the bolts in the front to the cross member. Any ideas on what to do?
Does anyone notice that some of the aftermarket suppliers for these mounts have the bushing orientation screwed up? Sometimes they're off by about 45 degrees, other times they're almost upside down. I've had to press them out and reorient it. It's like they pay no attention, but the orientation is critical for longer life and better dampening characteristics.
Nice video , I will be doing my 00 altima soon
Great Video. thank you for sharing.
When you put the motor mounts back in, did you let jack dowb from under oil pan? And jack up the cross member in the rear? And then jacked up the front?
Hi, good video! Do you have to lift the engine when you change the passenger side mount?
How many motor mounts on the Infiniti g20?
I wanna replace my plastic belly pans but I’m not sure if I need to buy a assented and driver side or if I can buy it as all one part. Can you help me? Please!
can u do a video changing out the transmission mounts? great video!!!
@ericsdiygarage do you where I can get FSM for this car?
Which Motor mounts did you buy? I need to change mine.
Wow bro that’s crazy, I know when I changed mine they were a little better but not by much
Hey man I just from ur channel and everything was explained crystal clear now I can replace it by myself u just earn urself a new subscriber
10:49 , for those having getting the bolt in due to misalignment, use a long screw driver and go down through that left side hole and use leverage by pushing sideways so the holes align and you can now screw in the the bolt to the engine block.
Thanks for the video. Those mounts are a bit of work but straight forward. It's the transmission mount that is most difficult. One of the 4 bolts I just can't remove.
Hey guys if you found this video help please make sure to give me a thumbs up!
check out the original video https://youtu.be/Rrju6_BJdNw
another great video bro!! I gave it a thumbs up!! keep going!!