This is a How to Video on How to Install the Tekonsha P3 Electronic Brake Controller on Infiniti QX80 – EBC Installation on Infiniti QX80 – Electronic Brake Controller Installation on Infiniti QX80
Parts Used:
Tekonsha 3050-P Quick Connect Harness for Infiniti https://amzn.to/2NPcwDg
Tekonsha Electronic Brake Controller P3 90195 https://amzn.to/2NQ7LsW
How to install a brake controller on Infiniti QX80
This how to applies to the Infiniti QX80 2014
This how to applies to the Infiniti QX80 2015
This how to applies to the Infiniti QX80 2016
This how to applies to the Infiniti QX80 2017
This how to applies to the Infiniti QX80 2018
Tekonsha 3050-P QUick Connect Harness works for the Nissan Armada too! https://amzn.to/2NPcwDg
This How to Video is the same for the Nissan Armada
This video will also show you where the OBD connector is for the Infiniti QX80
){kind=link}
Thanks for the video, very easy to install. The hardest part was finding a place to mount and install the controller.
Thank you for this video! I was going to take it to a shop to have done but looks easy enough for me to do!
What is that button next to the OBD 2 white connector below the steering column. It’s to the right side underneath
Thanks for posting! Very helpful.
Worked as well in '18 QX60. Thank you!
On my 2017 QX80 I found the head of the plug taped against the wire leading to the diagnostic port. It had so much black tape around it that it was hard to figure out what it was. I was not able to pull it down like done here because there was no extra wire. It was right up next to that white plastic box.
Why install this electronic brake?
I have infinity qx56 2011. Same car. Your video help me. Thanks.