somebody asked me how to install this so i decided to put a how to vid up on how to use a LOC or line output converter this is the device you use to install …
somebody asked me how to install this so i decided to put a how to vid up on how to use a LOC or line output converter this is the device you use to install …
You must be logged in to post a comment.
){kind=link}
What if I don’t have rear speakers? Hahaha does the front speaker wires
work?
hi i have a bmw f20 iv gt a sub and 6×9 that i wana run via the amp right
keeping in mind i dnt wana mess with the parking senses of the car coz they
run thru the rear speakers of the car how do i go about setting it up and i
probly need that rca converter
hey so where would i put my remote cable for the the amp. where would i
hook it up to.
positive = battery
negetive = ground/chasis
amp remote cable =?
Good video just had one question. When using the LOC would you still need
the remote cable? If so where would I get the 12v to turn amp on? Would I
run it from The fuse box using the radio fuse?
How would you solve my problem: I have the LOC connected to the rear
speakers then to the amp from there; but what to do with the remote wire
for the amp? Will I have to pull the factory head unit out and connect it
there or is there another way? 2013 Mazda 2 btw.
Do I have to use both speakers?
I ran the in line converter like you did in the video but I can’t turn the
gain up pass the first notch! My bass boost is all the way down but it’s
still clipping on my kicker 750.1 is it the boost on the converter that
needs to be adjusted?
can locs run into any stock deck?
Thank you very much sir this video is beyond helpful…… -Saab 9-3 owner
Could this work with a 2 channel amp with 2 12s ? i also have stock radio
this is a pretty good video.
Hey bro excellent video explanation. One question- could I hook up a stereo
2/4 channel amp and wire up all four speakers still from amp if I’m using
the rear speaker wires to connect to LOC? Thanks in advance
,I need your help I installed a uv10 indash head unit in my 740i bmw and
cant get any sound to come out the speakers someone told me it because I
have a factory amp need to know what I have to do to get the sound to play
please help
GS install bay. great video
Great video
Very helpful. Thanks.
I have 1 plug and 2 wires by the stock amp in trunk. Looks like there was a
amp , previously there. Do you know what there for
does it matter if youre installing a bass amp or a hi and mid amp?
Okay so i seen this video preety cool , what if I have my RCA jacks and I
cut and strip one of sides and just wire the rca cable I stripped to one of
the speakers to get signal
Where does the remote wire go?
Were do you connect the remote? From the amp?
Let’s use a car’s 12v battery to test the speaker polarity.
DUDEEEEE use a 1.5 volt regular aa batter if your gonna do that that is
soooooooo bad for highs especially!!!!! and if you are splicing into
factory output and splicing into RCA and plugging that into your amp the
voltage will be to high that converter that you got actually lowers the
voltage going into the the amp that’s why the they have a “high level
input” built into the amp thats made for the voltage from speaker output of
aftermarket head unit!
Okay so i seen this video preety cool , what if I have my RCA jacks and I
cut and strip one of sides and just wire the rca cable I stripped to one of
the speakers to get signal
Nate you don’t need the bypass all you need to do is run the remote blue
wire to the radio fuse box under the steering and is all is needed it. RCA
cables is just for signal to the amp.
what was the name of the website you mentioned around 2:35? I’m trying to
find the wiring diagram for a 2004 monte carlo
Could I use more than one converter if I have more than 1 set of subs?