Installation walkthrough of Rostra 250-1859 complete cruise control kit in the 2012 Hyundai Accent. Visit www.thecruisecontrolstore.com for full product listings and details. The Cruise Control…
Installing Cruise Control in 2012 Hyundai Accent
3
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
The manufacturer uses the harness in this kit for other kits as well. In
other models the orange wire is a tach input ( but not used on this kit ).
The yellow and white wires are clutch input shut downs which are not used
on automatic transmission.
Just curious. I tested the pink black wire on the brake as the correct
wire, not the pink. Do you know which pin location that one is in?
I also tested the pink/ black stripe to be the mate for the white/brown.
Something else is I have an orange wire from the control module not in use,
does anyone know what this was for? Everything tested fine and works but I
ended up with 3 wires not used…white, yellow,(clutch) and this orange
one. ??? I didn’t read anything in the instructions that it even existed!
@sheisskerl Our blue wire should go to the wire that tests 12v regardless
of the position of the pedal. Our white/brown wire should go to the wire
that shows 12v only when the pedal is depressed. I hope this helps.