Trying my best to answer your questions from the stereo install video I did here. http://www.youtube.com/watch?v=CBZbEKav-jE&list=TLO_UeA6JQEr4DmxxTp0SV6Hdj3…
Trying my best to answer your questions from the stereo install video I did here. http://www.youtube.com/watch?v=CBZbEKav-jE&list=TLO_UeA6JQEr4DmxxTp0SV6Hdj3…
You must be logged in to post a comment.
){kind=link}
You should never power an amplifier off of a fuse panel. No matter what.
Sagging wires are a fire hazard. If they are tugged out of place, they
could arc and start a fire.
Link in the info section below the video
no idea where the stock amp is located. Hopefully someone else can answer
that. I’ll try and post a photo of where exactly I’ve connected my power
wire tomorrow. Thanks for watching, dont forget to subscribe so you can
stay up to date when i post new stuff.
One more question. Did you install after market tweeters in the corner door
locations? If so what size are they and what model did you use and how did
you mount them? There so tiny and thin. My mbquart set came with huge 30mm
tweeters. Who sells a small thin tweeter that will fit in that tiny little
craves.
There’s no link
How did you manage to get a hole from the fire wall to the inside? The
wheel well and strut tower make it so I can’t use a drill or get a hammer
and punch in that tiny space. Did you do it from the inside under the dash?
I can’t tell if its made of metal or plastic but my drill bit would go
through on a 18v cordless
Thanks for the video bro. I had a feeling i should run my power wire
through that corner fire wall cut out. Didn’t want to drill through
anything important. I’m going to do that. Where did you connect the 12volt
wire in your fuse box? I thought they connected straight to the +posi on
the battery it self? Also, where is the stock amplifier located? Or is
there one on a the basic single din 6speaker system? I’ll use the existing
wire for the fronts is I can.
drill the hole from the inside under the dash.
check the description