Car Fix DIY Videos

Buy Now!
New Wheel Cylinder Set from 1AAuto.com http://1aau.to/ib/1ABCK01136
New Wheel Cylinder from 1AAuto.com http://1aau.to/ib/1ABMC00370

This video shows you how to install new rear wheel cylinders from TRQ on your 2012-2017 Hyundai Accent.

This repair was done on a 2013 Hyundai Accent GS 1.6L Hatchback 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Hyundai Accent
2013 Hyundai Accent
2014 Hyundai Accent
2015 Hyundai Accent
2016 Hyundai Accent
2017 Hyundai Accent

Tools you will need:
• Impact Screwdriver
• Pry Bar http://1aau.to/oaqJ/1AXAA00020
• 11mm Flare Wrench
• 11mm Wrench
• 10mm Socket
• 21mm Socket
• Side Cutters
• Ratchet
• Socket Extensions
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves http://1aau.to/ocie/1AXSS00048
• Safety Glasses
• Drain Pan
• Floor Jack
• Hammer
• Jack Stands
• Wheel Chocks
• Wire Brush http://1aau.to/oE5/1AXAA00079

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Hyundai Accent 4th Generation 2012-2017: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_a1VjIfNYHD37myg3V2Rx2

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.