Car Fix DIY Videos

Buy Now!
New Brake Master Cylinder from 1AAuto.com http://1aau.to/ia/ACBMC00490

This video shows you how to install a new brake master cylinder from TRQ on your 2012-2017 Hyundai Accent. The brake master cylinder contains the brake fluid reservoir, and also applies the needed pressure to activate the brakes when you press the brake pedal. If your master cylinder is leaking, or not working properly anymore, you risk brake failure, so it should be replaced immediately!

Estimated installation time for a professional technician is approximately: 1 hour 18 minutes

This repair was done on a 2013 Hyundai Accent GS 1.6L Hatchback 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Hyundai Accent
2013 Hyundai Accent
2014 Hyundai Accent
2015 Hyundai Accent
2016 Hyundai Accent
2017 Hyundai Accent

Tools you will need:
• 14mm Flare Wrench
• 14mm Wrench
• 12mm Socket
• Ratchet
• Socket Extensions
• Brake Fluid
• Cloth Rags
• Gloves http://1aau.to/ocio/1AXSS00048
• Safety Glasses
• Brass Punch
• Floor Jack
• Jack Stands
• Pick http://1aau.to/oajj/1AXAA00037
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.