This video outlines the basic steps to install a Hyundai I30 Window regulator Complete Mechanism. I’ve left out the pot riveting and drilling, but displayed how to strip the wiring loom, remove the glass, and re install the components in a 25 minute tutorial.
Part is available here: https://partsfactoryaus.com.au/index.php/product/hyundai-i30-window-regulator/
Live chat available on the site for all questions or concerns! Come talk to me NOW!
){kind=link}
Thanks mate
Hi. This video was excellent to show us how to change out the regulator. The only issue we had was the lock actuator plug was an absolute arsehole to get back in. It requires an unexpected amount of force to get back in for no apparent reason. Just though I would mention It for others. Thanks again for the video.
You mention "pop riveting" and I feel like I'm taking a math test! The screws to the speaker on my 2012 Hyundai Elantra are hex head and I have a set. Other than that it just looks like I will need photos of the electrical wires as they exist before removal of old regulator. Don't want to have to route them from memory. Thanks for the vid!
PS!!! I had no idea the window comes completely out and only rests on supports! My bias is that the window had a hole in the bottom with plastic pieces that must be removed and replaced. This looks easire than what I had been used to.
My issue is that the motor runs but the window does not go up so how do I take out the panel if I cant remove the window ??
This video helped me so much. I bought one of these to fix my car from them and the customer service and product are fantastic.
This video was invaluable when I was doing this myself!
why so low subs? U Should have more man!!