Parts used linked in the description below!
Watch a full tutorial as a 2008 Santa Fe will have a brand new License Plate backup camera installed. This Santa Fe has already had the radio replaced with an aftermarket touchscreen Pioneer Radio. This radio will display the video from the installed reverse camera.
This video applies to Santa Fe models for years 2007, 2008, 2009, 2010, 2011, and 2012. This video also includes dash trim and stereo removal, camera wiring, and installation.
Click here to see the Pioneer radio install video:
https://youtu.be/meSvOMkCRcE
Great tutorial on how to install a reverse camera:
https://youtu.be/rHORKUqlEM4
If you have any questions, leave a comment below! Be sure to like and subscribe!
Recommended Backup Camera:
*License Plate Camera: https://amzn.to/3csfJn3
Radio Parts Used (Amazon Associate / eBay Partner Paid Links):
*Metra 95-7325S Double DIN Kit: https://amzn.to/3i9om9C
*Metra 70-7302 Radio Wiring Harness: https://amzn.to/3zLIww8
*PAC SWI-RC Steering Wheel Control Interface: https://amzn.to/3xsDxzQ
*Pioneer AVH-2300NEX Double Din Radio (Discontinued)
–Recommended Radio: https://amzn.to/3z8L9Ju
*Pioneer Parking Brake MicroBypass: https://ebay.us/RVf61w
*AUX / USB Flush Mount Kit: https://amzn.to/2SYXEGS
*Rockford Fosgate RFI2SW RCA to speaker wire adapter (for Rear Seat Entertainment):
https://amzn.to/3EYZmvx
*Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases*
){kind=link}
Parts used linked in the description of the video!
Just wondering why you didn't route the wire down the passenger's side of the vehicle instead of the driver's side?
Was trying this out on my 2007 Hyundai Santa Fe w/ plug-in bu camera that has red bypass wire. I pulled apart the light connector harness off the rt backup light, stuffed the red wire in with the blue wire on the side connected to power, tossed the video connector thru the car and plugged it in to test it. Success! I then reconnected the power and light connectors together to see if the back-up lights were working along w the camera. I then noticed that the right license plate light and right back-up lights no longer work. (Maybe they were both not working, but that seems pretty coincidental.) I removed the right license plate light and found the bulb filament was gone. I then took the known-good left license plate light bulb and put it into the right lamp and it still doesn't work. Any suggestions as to what may have happened and how to fix this?
Thank you so much for this detailed video, helped me a lot to install backup camera.
Why didn't you run the wires down the right (passenger) side of the car? It seems you'd use less wire getting up to the top of the hatch.
This video helped immensely, especially running wire into trunk hatch
Where can I find a rear camera and new stereo/screen for a 2015 Hyundai Santa Fe Sport?
I bought this and installed it with on issue. just simple plug and play camera made to upgrade the camera http://www.ebay.co.uk/itm/224055732441
Very informative and well done, we also have install videos please take some time to view our page.
How come ours doesn't have a parking assist guide under camera settings on a avh-2440nex? The camera automatically has parking assist that i can't adjust
Will it work for Hyundai Tucson 2008
At 5:00 into the video you mention that the red wire can be used as the trigger wire.
In my setup (2012 Santa Fe) I have the red wire in the front wired into a Pioneer AVH-1300NEX and I have the back red wire and black wire spliced into the reverse lights in the back hatch. I did not run a dedicated ACC line through the trim since I only cared to have video when reversing.
The issue I’m seeing is that when I reverse, it pulls up the camera, but no video is transmitted – the picture is black. Prior to installing the Pioneer I had a Joying stereo and it didn’t have this issue.
I also experimented with running an ACC line through the cabin into the red wire at the back, and this caused the video feed to work but of course breaks the triggering mechanism.
Any suggestions? Do I need to go back and run a dedicated ACC line?
How did you make the wireing longer