http://www.youtube.com/watch?v=ZEpg1i4ax6Y – the FIRST METHOD to install led lights this tutorial is old, the new method 1 tutorial is much better. this is t…
http://www.youtube.com/watch?v=ZEpg1i4ax6Y – the FIRST METHOD to install led lights this tutorial is old, the new method 1 tutorial is much better. this is t…
You must be logged in to post a comment.
Please watch other videos if u actually want to wire leds correctly this is
sloppy as hell
Why did my head light go dim when I did it like the other head light is
bright and the one I wired it to is dim
If you go through the trouble to hook it up under the hood you may as well
run it to the fuse box
Also I would have snaked a wire/wires through the firewall myself.
Piss poor job, You should have gone through your firewall. Also hide the
lights under the dash area. Seeing the lights looks dumb
Dude! next time run wires through the fire wall, just sayin.
MAN U JUST FUCKED UP
Ghetto rigged. Poor job.
Don’t forget your fuses.
good job
Ok this all looks pretty dumb First off the fuckers that sell them should
tell you a sufficient way to do I have an idea going to try it if it work
ill post a video..
if you were putting a switch on it inside the car anyway why in the hell
did you hook it to your parklight for initial power instead of the fuse box
or somthing inside the car that was pretty stupid there bud i know this is
older vid i would hope your smarter now ??????????????
why didn’t you just spice it into the cigarette lighter and add a switch.,
That right there is not safe!!!
Ghetto
Blue AND Red? Nahhhhh
Does it bother driving at night?
ok i shoulda watched part 2 then commented i watched 2 and wow just wow
Will the signal light glow normally after fixinig these lights or will it
glow very slowly
im dizzy !!! wtf !! couldn’t understand anything of what he said !!!
You sure don’t know anything about electronics.
@jonatanalmendares i havent installed them…
the “silver” wire is tin or tin coated copper
yes you can.
@DubCrewGeckos first off, feel free to think what you want, second if you
know how to do it better, then you shouldnt be watching this vid, and
third, h8rs gonnA h8
@TheAlexLeko yeah i cant find a video on someone using the fuse box way
why and the hell did you do that!! you could have used the cigarette
lighter in the center console. instead of you cutting into the main harness
now if any moisture gets on to the slice it will cause a short.
looks like shit.
hey, quick question. I want to install led lights under the dash as you do
and behind the drivers seat so they shine through the back can i connect
more then one to the single headlight wire?
this is exactly how not to do this.. lmfao . wire it to the headlight
switch or some source of power that comes on with the running lights. Or if
you’re gonna go to the front of the car to wire it in, at least run it
through the fire wall. lmfao you’re gonna have blown fuses everywhere
you know. you could have just put the wire into the opening in the firewall
of your car. its not that hard. just locate where the other wires are.
@avietcong no. solder not neccessary.
im just wondering how come you didnt put the wire thu your fire wall?
ROOKIE
Props man for doing this yourself and everything, but wouldnt it have been
easier to wire ur second strip of leds into the other strip of leds? then u
wouldnt have to run the second wire from under the hood. i have the exact
same lights in my trailblazer, i have them in the same place as u, under my
driver and passenger seat, and i have 3 near my subwoofers in the back.
nice sandals
@MIMPRODUCTIONS22 no problem. glad i could help! if you could, post a video
response of your leds! i want to see how they look
Or if your just looking to have the lights to stay on all the time you just
run it into your fuse box (inside your car) on the driver side of the
dashboard normally.
You seem like you know what you are talking about… can you help me with
my LEDs? You said you should wire them to the headlight switch, where is
the headlight switch located?
can u uses the back tail lights as well? or r the back tail lights dont
caryy enought power to light them?