If you bought a set of OEM Rock Sliders and don’t have the instructions to install them, this video is for you. Easy install if you do a few things right.
Bolts used are M10 flange bolts. You’ll need 16 of them. If you have to purchase, get 10mm, 1.5 pitch, 30mm length.
Things to look out for:
1. Brake cable on the drivers side (don’t pinch it).
2. Getting those old bolts out if you have nerf bars (use WD-40 on them).
3. Lining up the OEM rock sliders (have a friend help or use a jack or boxes to position them on).
4. Weld nuts that weren’t used with the nerf bars (They’ll have to be cleaned out. Two are covered by a label).
5. Some people will think the sliders came with the wrong bolts. That’s probably not the case. The weld nuts need to be cleaned out.
6. Tighten bolts to 36 ft. lbs.
Hope this helps. Rock on!
See the write-up for the details!
Here’s a link to the write-up: https://drive.google.com/file/d/0B6m-1iwLMIGVVF9aSFU4eWItZk0/view?usp=sharing
How to Clean Weld Nuts Video: https://www.etrailer.com/tv-faq-deep-cleaning-bolts.aspx
that is a very good part for offroad – saved me many times!