In this “how to video”, Our very own MIke Clifton demonstrates how to trouble shoot a Powerwise golf cart charger. Mike goes step by step how to test, diagno…
In this “how to video”, Our very own MIke Clifton demonstrates how to trouble shoot a Powerwise golf cart charger. Mike goes step by step how to test, diagno…
You must be logged in to post a comment.
){kind=link}
how about the 48v lestronic 2 video?
Annette, call 866-379-1211 and ask for Rick. he’s our “charger guy”.
the board test is presented but is confusing…I checked the board, it
sparked and came on, but the video says the board is then bad? I changed
the board, but the charger still did not charge. The most important thing
before you start changing boards is to check each battery individually to
see if they hold a charge, (with a regular battery charger for 6V
batteries) If even one battery is bad (won’t hold a charge) then the
charger won’t come on.. its not the board… its the battery!
do you have video for Yamaha 48 volt g22 charger cheers
I bought the fuse and the diodes from you and received them today but one
of the things you dont show on your video is were and how you mount the new
diodes the old ones are not drilled all the way thru so do I have to drill
holes to mount them. I need to get them mounted so I can check the board
which may be the next thing I need to buy from you Thanks for your help and
what a great video.
THANK YOU!! this was very helpful and our golfcart charger that got
gatorade spilled on it now works perfectly. you saved us $300 bucks! thanks
– masterJdogd
Thanks for the excellent video! We were able to troubleshoot and narrow it
down to an extension cord that could not handle the load.
Jack, we have new boards here we can sell you. 866-379-1211 if you want to
order one.
I bypassed the board and found it to be the problem but put a new board on
and it still does not work. I bypass it again and charger works and golf
cart response. I have now tried 2 differ “new” boards and the charger is
still a NO go. What else do I need to look at??
Where can I get a new board?
I am using 3 12 volt instead of 6 volt batteries. Will the charger still
work with this configuration?