Limited Time: Get $10 Off Your Order
https://1aau.to/m/YT-Email-10dollars-Off
Buy Now!
New Serpentine Belt Tensioner with Pulley from 1AAuto.com http://1aau.to/ia/1AEBT00099
1A Auto shows you how to repair, install, fix, change or replace a broken, noisy, squeaky, worn or groaning serpentine belt tensioner. This video is applicable to the 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Honda CRV
🔧 List of tools used:
• 14mm Wrench http://1aau.to/tqy/1AXAA00010
• 10mm Socket http://1aau.to/t4a/1AXAA00017
• 12mm Socket http://1aau.to/takn/1AXAA00015
• Serpentine Belt Removal Tool http://1aau.to/td/1AXAA00019
• Ratchet http://1aau.to/taeg/1AXAA00016
• Socket Extensions http://1aau.to/takn/1AXAA00015
• Torque Wrench http://1aau.to/tqM/1AXAA00044
• Rust Penetrant
For More Info visit us at http://1aau.to/h/bs4/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Do you have to remove the pump? Of get away with putting a new belt on with out the removal of the pump?
Should of wd40 the bolts? God forbid a bolt snapped.
Why don't u remove the wheel and fire wall. Make it easier, gotta get mine done.idler puller, belt tensioner and new belt.
Your video and a few basic tools I've been buying on Craigslist this year helped me save a few hundred bucks doing this job myself I less than an hour. These instructions were exactly what I followed for a 2008 CRV. It works perfectly. THANK YOU!
Nice tip on putting back the serpentine belt: Losen the tensioner pulley from the bottom and then slip the serpentine belt on to the crankshaft pulley.
Note that if you're just replacing the idler pulley, there is no need to remove the power steering pump though it does help to remove the power steering fluid bracket (another two 10mm bolts).
Thanks a lot of your detail video and of course if we know how to do it we will buy more part from auto part to do it myself
My CRV is at 182,000 miles. And I know the belt needs to be replaced. But based on the sound coming from the tensioner I'm sure its ready as well. This was an excellent video. Very clear and informative.