How to Replace Front Shock Absorbers 1994-1997 Honda Accord

How to Replace Front Shock Absorbers 1994-1997 Honda Accord

Shop for New Auto Parts at

This video shows you how to install new front shock absorbers from TRQ on your 1994-1997 Honda Accord. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.

Estimated installation time for a professional technician is approximately: 2 hours 12 minutes

This repair was done on a 1995 Honda Accord LX 2.2L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
1994 Honda Accord
1995 Honda Accord
1996 Honda Accord
1997 Honda Accord

Tools you will need:
• 17mm Wrench
• 12mm Socket
• 14mm Socket
• 17mm Socket
• 19mm Socket
• Press
• Locking Pliers
• Ratchet
• Socket Extensions
• Torque Wrench
• Gloves
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses
• 5mm Hex Socket
• Floor Jack
• Hammer
• Jack Stands
• Wheel Chocks


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



@TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.