Thanks just ordered a 200 watt amp w a new head unit and a pair of pioneers
w/ twitters that got a 50 RMS rating. Also back panel pioneers. Should be
close to 300 watts all around. Crutchfield does magic.
hello, i have an accord 2010 lx, i put the crossover inside the door, make
sure u adjust the tweeters to max cuz u wont be able to reach the control
again, if the tweeter is too annoying, just equalize using the head unit, i
have POLK components in the front and POLK coaxial in the rear, i hope this
can answer ur question.
my door light(curtesy light) on the drivers side needs to be replaced. but
i accidentatly pushed the socket in the door panel. is it possible to
remove the door panel without disconnecting the tweters?in other words just
open the bottom of the door panel. i just need to reinsert the socket.
i noticed you are using regular speakers in your doors that were once
component. is it possible for me to use 2 way speakers in my doors if my
car has tweeters and if so will i need to remove the tweeters?
The speakers im using are 3 way car audio speakers so yes they have a
tweeter in them. no, you don’t have to remove the tweeter, you’ll just
better highs!
Nice upload TheJ2effect, I am thinking of doing a component setup for my
Accord, which involves setup main speakers, tweeters and a crossover. Any
idea where to put a crossover panel? and still have easy assess to it tweak
the crossover frequency screws?
Changing the stereo is easy, go to ebay and order the radio deck kit and
wiring harness. This will allow you to put an aftermarket deck in the dash
and connect the aftermarket wiring to the factory wiring without cutting it
up
The 94 has 5 1/2 speakers (at least mine did). I got the exact size
speakers and just dropped the new ones without any hassle about using a
bracket or doing modifications. I didn’t need to fully remove door panel,
just pulled the bottom to make enough room unscrew the old and work in the
new speakers.
Thank you so much!
Great video man, helped out a lot!!!!! Thanks again!!!!!
Thanks just ordered a 200 watt amp w a new head unit and a pair of pioneers
w/ twitters that got a 50 RMS rating. Also back panel pioneers. Should be
close to 300 watts all around. Crutchfield does magic.
Do you have the Part # for that DVD
hello, i have an accord 2010 lx, i put the crossover inside the door, make
sure u adjust the tweeters to max cuz u wont be able to reach the control
again, if the tweeter is too annoying, just equalize using the head unit, i
have POLK components in the front and POLK coaxial in the rear, i hope this
can answer ur question.
the shaky camera was making me nervous lol..
happy u did this video people but systems in all the crappy cars its hard
to find a video on a good car speaker installation
Where did u buy the plug and play?
my door light(curtesy light) on the drivers side needs to be replaced. but
i accidentatly pushed the socket in the door panel. is it possible to
remove the door panel without disconnecting the tweters?in other words just
open the bottom of the door panel. i just need to reinsert the socket.
Good job dude save my some money thanks
i noticed you are using regular speakers in your doors that were once
component. is it possible for me to use 2 way speakers in my doors if my
car has tweeters and if so will i need to remove the tweeters?
good catch! Thanks for watching!
Factory speakers has shity mids doesnt go loud. But hell yeah they sound a
lot better with bass the bass goes a lot deeper than aftermarket speakers !
The speakers im using are 3 way car audio speakers so yes they have a
tweeter in them. no, you don’t have to remove the tweeter, you’ll just
better highs!
thanks for takng ur time and posting this video in courtesy of others like
me that wants to work on their car and changing their speakers.
any idea how to remove the back speakers and the size of them? if you have
the video that would be great. thanks
should be similar format to taking panel off
I put it in the video, don’t remember right off hand
Nice upload TheJ2effect, I am thinking of doing a component setup for my
Accord, which involves setup main speakers, tweeters and a crossover. Any
idea where to put a crossover panel? and still have easy assess to it tweak
the crossover frequency screws?
Thanks, saved me some moolah.
hey bro you can just use the stock housing all you have to do is rip the
cheap speaker out of it lol thats what i did and it fit like a glove
Changing the stereo is easy, go to ebay and order the radio deck kit and
wiring harness. This will allow you to put an aftermarket deck in the dash
and connect the aftermarket wiring to the factory wiring without cutting it
up
Not sure, sorry bro!
No problem
Good video!
great vid it help me a lot, but just wanted to know where did u buy the
adapter to fit the stock wire.
The 94 has 5 1/2 speakers (at least mine did). I got the exact size
speakers and just dropped the new ones without any hassle about using a
bracket or doing modifications. I didn’t need to fully remove door panel,
just pulled the bottom to make enough room unscrew the old and work in the
new speakers.
Where did you get the wiring harness adaptors?