CLICK HERE TO PURCHASE:
https://www.rollingwrenchdenver.com/products/honda-ruckus-plug-play-performance-cdi-coil-combo
If you are looking to get the very most performance out of your Honda Ruckus, this quick and easy modification will certainly do the trick. Our Rolling Wrench CDI coil combo is the best option out there for cdi boxes. It out performs the NCY cdi box and even the kitaco cdi unit. It has a very simple install, no cutting or splicing wires. we were able to get a 36 mph ruckus go 43 mph after the mod.
Oh Ya! the kill switch will even work after the install. Unlike the rest of the CDI units on the market.
){kind=link}
I have both full stage 1 kit & stage 2 kits from Rolling Wrench. The clutch is 1 item most overlook & if you are over 200lbs, it is a necessity with the 3 larger pads. My curb weight over stock is around 240lbs so I also changed the rear shock & since I never kick start (my 1st Harley a 63 Panhead broke me of that) I also have an ankle biter & a performance carb but the same stock size ports.
At 240lbs over curb weight (bags & locks) I cruise easy at 44/46mph. Now if I was 100lbs lighter would be likely over 50mph. Plus I did not lower the seat (I'm age 70 with a bad knee) use footpegs which is less aerodynamic & have a blackout windscreen to keep air & bugs off my chest (live in the deep South).
Needless to say I am very happy with both kits performance. I run the Ruck everywhere around town & the ability to cruise at 45mph means I'm good everywhere except the Interstate (Harley is now only used for that).
1 Tip, the included NCY variator performs better with this clutch than a Polini, I have both & was surprised.
I owned a 2008 modded ruckus and sold it 7 years ago. Missed it horrifically. I scored a 2009 Ruckus w/ 780 miles on it just last week. Within a week I found your site, videos, and documentation. You now have an order for this EVI, variator kit, 4g/4.5g weights, and some other parts to move my +200lb butt. Now to find a fuel filter and replacement pump so I can do the swap while I have everything torn apart. I look forward to getting this and being able to get past 36ish mph out of the stock motor.
Where you connect the red + Hotwire matters, because it originally connected to battery +. It must be connected to the ECU. like you show in the video, connects to one of the Run/stop switch wires. You dont say specifically witch wire. I tried connecting to the master relay and the engine wouldn't shut off. On the metropolitan Its the black wire w/ red stripe that goes to run/stop switch. Also what is the Blue wire for? Is this the signal or voltage that triggers the ignition coil? What does the motor brain do? does it advance the timing? What are the timing specs?
Those things suck , just get a grom
when will these kits be back in stock??
Where can I get my hands on one of these? They are sold out everywhere, I am really interested in getting one!
I went to your guys website but your sold out of it. When are you going to have it stock again?
Hey bud. Where do you wrap the tach wire when you’re running the EVI coil?
Installed my CDI box today…I am 210 and my ruckus will peak at 70 KMPH down hill, And attain 65 KMPH on flat road…Installing a Polini Variator next.
Just installed on my brand new 2022 Ruckus and definitely felt an immediate difference on take off. This is an absolute game changer! Thanks Rolling Wrench for an amazing product! Just a few more pieces to add for little more speed increase but this already released the beast within.
Just got my first Ruckus. I bought it brand new 3 days ago. I NEED one of these. Thanks Matt for going above and beyond. Subbed!
Can you still do the standard computer reset with this EVU plugged in?
Does the grade of gas matter with this upgrade?
Are yall going to make this for the 150cc scooters?
Are you guys restocking this anytime soon? really eager to put this on my ruck!
Just put this on my new 2022 Honda Ruckus and it woke it up big time. Just do what Matt says, get a tachometer then do this CDI box. My stock Ruckus came with 7 gram rollers. I went with 5.5 g sliders. Woke up my new Ruckus. Looking forward to more parts from Rolling Wrench.