https://www.1aauto.com/?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=r2DtLmfJJaM
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, worn or faulty door lock key cylinder. This video is applicable to the 08 Honda Civic.
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• Flat Blade Screwdriver
• Phillips Head Screwdriver
• 10mm Socket
• Trim Tool Set
• Ratchet
• Socket Extensions
• Pick
• Razor Blade / Gasket Scraper
🔧 Instructions:
1. Removing the Door Panel 0:22
2. Removing the Door Lock Actuator 5:30
3. Removing the Door Lock Cylinder 10:29
4. Installing the Door Lock Actuator 11:48
5. Installing the Door Panel 17:49
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Great video, it helped me a lot!
To remove the lock cylinder you don't touch the 2 screws you showed. You have to remove 3 little screws on the opposite side from the plastic casing and then the C clip (retaining clip? )
Does this work on a civic 2010 DX-A? The doors lock aren't electric on that model. Also, thanks a lot for the tutorial, you guys did a great job!
hate the FLAT KEY…crooks use that to get into my Honda Civic 89….
do one for a 2012 accord. those things break constantly