http://www.1aauto.com/1A/HeadLights/Honda/Accord/1ALHP00097 http://www.1aauto.com/1A/HeadLights/Honda/Accord/1ALHP00100 1A Auto shows you how to repair, inst…
How To Install Repair Replace Broken Headlight or Bulb Honda Accord 98-02 1AAuto.com
211
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Thanks I have to replace my headlight assembly very soon.
thank you so much for this simple tutorial! you guys saved me the
ridiculous $15 extra the dealer was going to charge me to put it in! when
they told me they were going to charge that much for “labor”, the joke made
itself – how many mechanics does it take to screw in a light bulb?
Thanks for the video. Very helpful!
Thank you. I will look to buy from you in the future.
Thanks for watching. 1aauto.com 888-844-3393
hi i was wondering why does my car has gaps after i put everything back
together. i had gaps from the headlight and a gap from the bumper
If i want to take out the Center Audio console in my 2000 honda accord will
it disable the security system for the car?
It might be some type of bumper cover support. You may be able to get one
from your local salvage yard.
@StupidGuhji the bulbs twist into place and are usually held there by the
rubber o-ring that seals out moisture. If the bulb appears stuck, it can
help to gently wiggle the bulb to get the seal to release and come out
@18roger23 There isn’t a way to adjust the bulbs. To correct the angle of
the lens you would need to turn the adjusting screws on the back of the
headlight.Hope this helps.
Do you guys ship to Canada?
@crdennis123 Here’s a video that will show you to remove the headlight. If
you just need to replace the bulb, you should be able to reach in behind
the light to remove it, without taking the headlight out.
youtube.com/watch?v=qhgbHmPJ-Ew&feature=player_embedded
@831FATMAN You’re welcome. Have a great day!
You may want to double check everything to see if the bumper’s lined up
correctly.
I’ve been driving around with a new pair of bulbs for the past week because
i didn’t know how to replace them. Thanks to this video it took me all
about 60 seconds. thanks
the thing is i have a v6 and the driver side is really hard to get to the
bolts.. this is a 4 cylinder battery on opposite side..
wow took me 45 mins and all is good:) thanks for the video
Thank you all for your advice! 🙂
the thing is i have a v6 and the driver side is really hard to get to the
bolts.. this is a 4 cylinder battery on opposite side..wow took me 45 mins
and all is good:) thanks for the video
HI Steven, This isn’t something that we have tried, you might want to ask
this on the Crutchfieldcom forum, they tend to deal all kinds of different
car audio environments, and may be able to tell you exactly what you need
to do. 1aauto.com 888-844-3393
@pratledge it’s a 20mm full diameter plastic clip fender fastener or a
rivet.
@1aauto can you put a 01-02 coupe front bumper on a 99 accord?
The coupe and the sedan are very similar in how they are attached to the
vehicle.
Quick question. Trying to close the gap between the bottom of my headlight
and bumper but I don’t have that bracket under my headlight that the front
bumper sits on. Do you know the name of that bracket? My best guess I found
is a bumper filler but not too sure. Thank you
On the 98-02 they are part of the main beam. this video will show you how
to replace them.
if you don’t have to remove the bumper to replace the bulbs then why take
off the bumper at all? My turn signal is going out and i would like to
change it, but i dont want to take off the entire bumper